Adding IAT sensor scalar so SD can be ran properly would be a start..
Type: Posts; User: Johnson Tuning
Adding IAT sensor scalar so SD can be ran properly would be a start..
Any 2018 aftermarket cals available?
yeah flex works on the 18 no problem.
Just reference a 2018 F150 calibration..
normally this is caused by not copying the cold start ignition retard tables to the 'alcohol' cold start ignition retard tables. Some ROM's don't have these tables defined.
If you use the stock cal it won't use the IMRC control to power the heat exchanger pump and also the mct won't read without the breakout harness and standard sensor. Whipple uses a stock gt500...
...
You can over time the engine on Ethanol very easily. Hence 'more timing doesn't always mean more power'. Ford makes it very easy to know the stopping point (for those without a dyno) by having...
Has anyone seen the vct schedule 'Fuel Economy Drive'?
'16 GT TT 6r80 will go from 'Best Fuel Economy' to 'Fuel Economy Drive' during tip in partial throttle.
When it enters this mode, the car...
Yeah you can do that or set all tables to 100%
When disabling auto start/stop on my '17 f150 eb, it will throw a dash error message for steering system fault. Any ideas?
Why would you want to do that?
Any update on this?
Sorry just to clarify, you cannot flash a 14 mustang roush file to a 14 f150 pcm correct?
Does anyone have a Roush Strategy file for 11-14 F150? Will a 14 Mustang Roush Strategy safely flash to the PCM? Although they're both copperhead pcm's, the OS code is very different. Thanks!
anyone have a pre 2015 roush f150 file?
Can a 14 roush mustang file flash onto the f150 pcm?