Well I hope you get it figured out as I recently picked up a 2014 S550 that I would like to tune and have read a number of your posts. I have the original MPVI Pro so I'll need to get the MPVI3 in...
Type: Posts; User: JimmyS
Well I hope you get it figured out as I recently picked up a 2014 S550 that I would like to tune and have read a number of your posts. I have the original MPVI Pro so I'll need to get the MPVI3 in...
I'm just tossing out suggestions here that won't hurt to try and if you've tried them already, it can't hurt to try again with the changed cam tables.
Try lowering your DAL table in the 20% and...
Are you running E47?
Glad to hear it helped!
Yes
It's been over a year since I sold my Sky so my help may not be as good as what you'll get from the others here but after peeking at your tune, I would suggest that you review the Gm Tech tunes...
Ah okay. If it was my personal car, I would do some testing with the tune but that takes time and lots of patience and most people want immediate results.
Thanks!
I guess nobody else has run into this slow to respond pedal issue?
A8. Thanks
Have a friend with a 2016 Z06 and he wants to if there is something he can do about the throttle hanging. I've never driven the car so I can only go by his description. He says that when he lets off...
http://www.hptuners.com/forum/showthread.php?38357-LNF-Guides
What happened to the engine that required it to be rebuilt/replaced?
Looks like it is working correctly as it is subtracting Barometric Pressure from Boost Low Res.
Do you have the same settings (65.89kpa and -6.35kpa) in the SC/TC Boost Sensor tab as well?
Are you boosting more than 20psi? You definitely should be but your post could also lead one to believe...
62238
You should come up with similar numbers to these.
Have you tried matching Bills 3D chart using your 3D chart?
If you log times like Bill mentioned in his thread, you'll be able to easily see the differences that reducing the overlap has. My first go-round netted me a .3 second reduction in my 60-100 times...
I'm running similar tables to what Codename Bil Doe posted here and have had great results:
http://www.hptuners.com/forum/showthread.php?46907-LNF-LHU-LSJ-quot-race-quot-cam-timing
I have seen similar situations from a bad connection at the MAF sensor where the harness was pulled too tight and MAF/VE was spiking every once in a while.
Thanks! I emailed support and they told me the same thing. VCM controls in the scanner do absolutely nothing on my car. Found a used DashHawk II for cheap and luckily it is able to do a case learn....
I've been trying to do a CASE learn on my 09 Saturn Sky with an LNF and all of the VCM Controls in the scanner seem to be greyed out. The CASE learn button shows "NOT CONNECTED" before I connect to...
I've been trying to do a CASE learn on my 09 Saturn Sky with an LNF and all of the VCM Controls in the scanner seem to be greyed out. The CASE learn button shows "NOT CONNECTED" before I connect to...
I have 2 nterfaces and the second one has a yearmodel license for 2007 Solstice's but when I try licensing a 2007 Solstice tune, I get a Polling Failed message in the credits available area.
I am...
Definitely run the best fuel you have available.
Start studying by reading the LNF threads and watching the videos at the bottom of cobaltssoverboosters post and when you have read and watched...
In your tune file go to Torque Management>SC/TC Boost Control>Pressure RPM Factor and raise 3000 to 6000 settings from 3.101 to 3.500 and see how it responds. You may need to raise it a bit more or...