For anyone interested... to test my theory I desensitized the knock sensors and adjusted the amount of timing knock pulls out... it seems to have resolved the cyl6 misfire.
Type: Posts; User: batsy74
For anyone interested... to test my theory I desensitized the knock sensors and adjusted the amount of timing knock pulls out... it seems to have resolved the cyl6 misfire.
I am curious if anyone thinks that excessive knock retard could cause Cyl6 coil misfire code.
I've changed all coils, plugs and wires... yet the misfire remains.
Thanks,
-Josh
It syncs thru one-drive automatically. You can set the location of certain windows system folders (like documents, music, photos, downloads, etc) by right clicking and selecting properties. I just...
I think I figured out the "why"... now I need to figure out the "how to fix it"?
The two computers I use share a cloud drive where "my documents" live. This allows me to have the files I want no...
wondering where my settings folder might be found....
Any thoughts on how to force earlier shifts?
That's great!
124457
Here is the compare log from the changes you made to his tune.
Am I reading this wrong, or are there changes to the 'Engine'?
Thanks,
-Josh
124451
So I adjusted the part throttle shifts and it is better... but it still won't shift if I keep it full throttle.
I am also seeing higher than what I expect for IAT temps.
Any thoughts as I keep...
New coils fixed the problem.
Haha... very good point. It is all getting clearer as I work thru some of these things. Point taken.
Responding to old threads tends to be the result of my "searching"... I find old threads and...
I don't know why this is screaming past 6000RPM. I set the Speed to zero and the RPM to 5200... and I must be missing something here. Any help or insight would be greatly appreciated!
(Side note:...
OK then... thanks!
True... but I've found that often paying for a course results in the same results. Would you suggest a good course worth paying for and won't end up with me needing to learn thru osmosis?
Yes... please do!
.... I hate the forum police... "just search"... I just want to know what I want to know... not spend hours studying other folks conversations. Any links would be great so I...
Just to keep this thread complete for future seekers. The plugs all seem to be fine. After changing them I am still getting an intermittent misfire. Going to swap Coil from Cyl 6 to Cyl 2 and hope...
I just checked the tune from Whipple and they have rev limiter under fuel cutoff set to 6,400rpm.
I think this is because it is generally a very bad idea to go lean when using a supercharger. This...
perfect! that's what I was looking for. As far as I know it's stock., I'll set that to the stock value from my as delivered tune file.
I'm trying to get the trans to stop holding the gear at WOT...
Thoughts on the rev and shift point?
any other interesting observations?
123880
123881
other logs from this same tune:
123884
123882
123883
8 New NGK IRIDIUM IX Spark Plug LZTR7AIX-13 # 5107 https://a.co/d/1hAMYMb
Gap them at .032
Stock exhaust manifolds.
I don't see any carbon tracking on the porcelain exterior.
123720
This log didn't quite show the misfires because it does it more on the highway. I was driving home on slower roads when making this log and then the wheel hub failed on the drive.
-Batsy
crickets... Should I ask the question differently?
What wires do what on the baro sensor?
Does anyone else experience spark plugs going bad once a year? I don't know if it is me doing something wrong or just something I should expect as normal.
Cyl 6 seems to go bad first every time. If...
Any thoughts?
I am on the 4.11.157 beta version. I am not sure exactly when it stopped... but I just did a clean install of the suite because you said it was working for you... and it still only allows me to save...