Search:

omega 5,
yea, i moved those tables all over with no real results... they are maxed out on my final tune.
Bill,
i had read that also, i was just thinking out loud.
I just spoke to ryan @ pep...

No belt slip. It is something I am missing... it did it with the stock tune as well. The boost is perfect and every time at 5600 it drops and holds at 13psi.
The max boost by gear table starts at...

Yea, I asked Ryan on the other car last year... He said to try taking the dynamic air table to 300 and 400. It worked on the DYNO but not on the street. I tried it this time with no changes at all....

I have a 06 cobalt ss 2.0 s/c that I am tuning. The tune is spot on 11.8 a/f with 16 psi and then the boost falls to 13 psi around 5600 - 5800 rpm. This happened once before with an 05... same thing....

Thanks lazman,
I see on can vehicles I can change it to cal instead....didn't know.....thanks again.
Joe

No...i left it gmlan. Should I ?
Thanks,
Joe

Hey guys,
No matter what I set the speedo mph limits to, it still hits at 155. Am I missing a table somewhere. I have looked everywhere and come up with nothing. This is one of the many odd...

Hey guys,
This is drive by wire and I already have 14% tps, I don't think a hole will help. It starts perfect cold, but it has to have pedal assist as it warms up. The car made good power with the...

I thought I was the only one fighting this issue.... I just ground a custom cam for this '04 and it wants to hunt and die on occation. I wish there were air flow tables like the ls based cars. A base...

Thanks, I will try the disable in the am...hope that fixes the issue.
Thanks again,
Joe

hey Bill,
I am having the same issue as listed above with the timing table and the wrench light. Can you please shed some light on the subject. :pray:
Thanks,
Joe

Thanks....just wanted to make sure.

Hey guys,
I am getting ready to purchase my first ford stuff...do I need anything different or will the credits update with my new code and I am ready to go?
Thanks,
Joe

Hey guys,
I have a bump you can feel and see on the dyno when I make pulls in third at wide open in lock up. This is on a 04 vette and I have had it happen on a 01 also. You don't feel it on the...

Hey guys,
I have had 2 seperate cars do very similar things...on wot the car will not pull past 4000 rpm. On one car the guy was using 110 leaded fuel and the O2's took a crap. I just got a call...

Hey guys,
My laptop crashed and I am using my spare laptop and now I am having problems. Some cars I can't get into at all and some I can get into with the scanner, but I get a 4000 checksum error...

Hey guys,
I went through the posts looking for a similar condition and found one with no help for the problem. Hopefully somebody has run into this before and could shed some light on it for me. I...