Start a support ticket on hptuners.con and they should fix it in and release it a beta for you I had similar issues with my 2004 impala ss and they fixed it pretty quickly.
Type: Posts; User: Swiggles
Start a support ticket on hptuners.con and they should fix it in and release it a beta for you I had similar issues with my 2004 impala ss and they fixed it pretty quickly.
I’m emailing support now.
What do you mean by re-poll? Refresh? I removed and added it a few times. It shows it’s supported but then when I I select start to record the log it disappears with a...
So knock retard, a VERY IMPORTANT PERIMETER, does not log on my scanner with 4.0z this has worked since I had a serial version of htp, how can you ?upgrade/update? your hardware and software and...
try installing everything in compatibility mode even framework and then set them to run in compatibility mode.
in some how to's that ive read for these motors they say to start with that timing table so you will be safe. copy the high and low tables to the 03 pcm. and with those mods you should be fine.
now i havent used the pro version, im using my egr for the wideband.
in the table on the scanner right click on with EIO Input you used for the wideband, its at the bottom of the table. then just...
i know this is an old thread but i made a diagram to help me better understand what to wire to what on my GTP with my LC-1, should apply to most WB though.
EGR wiring...
with many of the widebands you can run as the narrow band and not have to have a narrow band sensor. thats what i am doing with my lc-1. it will act as the narrowband sensor for the pcm and as my...
yes you can run more than one wire to them. they are just sending a voltage out so it will go to all the attached wires with the same amount.
the vin and osid will not match. you have to highlight and copy all the fields. if your still using the gt trans then you can leave those fields alone.
speaker wire is NOT proper wire. use primary wire for automotive.
nevermind i misread the directions.
Does anyone have a 97 GT file they can send me?
sorry wrong place
i think you can switch over the trans inner wiring harness and be ok but im not sure, contact dave from trippleedgeperformance.com he knows everything about these transmissions.
just to be safe...