Search:

Type: Posts; User: jr2185

Page 1 of 5 1 2 3 4

Search: Search took 0.00 seconds.

  1. Replies
    10
    Views
    220

    I believe he is asking if you can program it to...

    I believe he is asking if you can program it to crank 3 seconds before starting so he doesn't have to floor it to keep it from starting.
    There is probably some parameter somewhere that would change...
  2. No need to unlock anything to read the CM2350....

    No need to unlock anything to read the CM2350. Haven't tried writing it.
  3. Thread: ecoboost 2.3

    by jr2185
    Replies
    3
    Views
    195

    You need a lot more info in your log. You should...

    You need a lot more info in your log. You should at least add all the sources and air load.
  4. SCT says to change the load type to 1 to use the...

    SCT says to change the load type to 1 to use the neutral rev limit as a 2-step.
  5. Replies
    5
    Views
    272

    Here's another one, but I don't think it will...

    Here's another one, but I don't think it will make much difference. It looks like maybe you aren't able to log memory parameters on this particular os.
    114432

    You could try this one for a 1.6EB...
  6. Replies
    5
    Views
    272

    You can try this one. It's not perfect, but...

    You can try this one. It's not perfect, but should have what's needed.

    114391
  7. Replies
    5
    Views
    272

    You are going to need a lot more pids in your...

    You are going to need a lot more pids in your log. You are missing all your sources, air load, and throttle angle just to name a few. Posting your stock file might be useful too.
  8. Replies
    3
    Views
    331

    You are using the beta software?

    You are using the beta software?
  9. Yeah idk. I think you need to investigate your...

    Yeah idk. I think you need to investigate your VCT settings. On every spike VCT Schedule Mode switches between "Fuel Economy Drive" and "Disabled". I also realized I don't have cam position in this...
  10. You are missing a lot of needed parameters in...

    You are missing a lot of needed parameters in your log. Try this channel list.
    114194

    Don't know if I can help you with your issue, but whoever does will need more info in the log.
  11. Replies
    3
    Views
    286

    No, I found it in WinOLS and would have to add...

    No, I found it in WinOLS and would have to add the map to HPT so it can be changed.
  12. If you download the WinOLS demo, I send the a2l...

    If you download the WinOLS demo, I send the a2l winols project to you, you delete all the files from it you don't need, and send the winols project back to me, I can send you an .xdf. ...If i can...
  13. Replies
    3
    Views
    286

    I found a map called "Maximum allowable vehicle...

    I found a map called "Maximum allowable vehicle speed when 4WD low range vehicle speed limiter logic is enabled" that is set at 39km/h. I also found a switch called "Switch to activate 4WD low range...
  14. Here is one from a 2014 Cab and Chassis. I'd like...

    Here is one from a 2014 Cab and Chassis. I'd like to find one from a pickup to compare.

    113619
  15. Replies
    4
    Views
    387

    I don't think the issue is that you are missing...

    I don't think the issue is that you are missing parameters, I think your file is just very different from most other Ecoboosts.
  16. Replies
    10
    Views
    608

    I'm not sure if these are relevant to what you...

    I'm not sure if these are relevant to what you are trying to do, but I don't think these maps are defined correctly. And they are set below the 270 you said you wanted. I also agree that you should...
  17. Replies
    13
    Views
    1,903

    My guess would be the PRN1 map.

    My guess would be the PRN1 map.
  18. Did you get this figured out yet? I don't have...

    Did you get this figured out yet? I don't have your file, but looking at another Turbo RR file it looks like once it enters Component Protection for exhaust temp, it won't exit until 80℃. Maybe what...
  19. Replies
    1
    Views
    290

    I can't say for sure, but it works just fine on...

    I can't say for sure, but it works just fine on my 2013 MKT 3.5 ecoboost and it also isn't on the supported list.
  20. Replies
    8
    Views
    2,407

    Did you check to see if it's already supported?...

    Did you check to see if it's already supported? My Lincoln MKT which is the same vehicle is supported.
  21. Thread: Udp

    by jr2185
    Replies
    2
    Views
    918

    Yes, usually

    Yes, usually
  22. Replies
    27
    Views
    10,070

    Here is a stock tune and log from a 2013 Lincoln...

    Here is a stock tune and log from a 2013 Lincoln MKT.

    111428111429
  23. Replies
    7
    Views
    1,252

    I know where you can get them. If anyone is...

    I know where you can get them. If anyone is interested, let me know.
  24. Replies
    16
    Views
    2,846

    Thanks for your help, guys. One more question,...

    Thanks for your help, guys. One more question, what do you do with tip out? Same or leave stock?
  25. Replies
    16
    Views
    2,846

    So would it be advisable to not zero them and...

    So would it be advisable to not zero them and just lower them?
Results 1 to 25 of 112
Page 1 of 5 1 2 3 4