126699
Here you go
Type: Posts; User: Hano
126699
Here you go
98684
This is a 2012 Focus St stock
Hi here you go.
Ok. Sorted it open with the new Beta 4.5
The new Beta 4.5 can open these files now providing you have the MVPI2 connected
Opened a few files so far on the EU spec Fiesta and the Ford Ranger Duratorq
Still cant open it with MPVI2
Any one care to help , read a car yesterday and it said iI must upload to support
2016 Ford Ranger 3.2 diesel
95607
Did this and I have some nice burbles coming from the Exhaust
Thanks
Thanks will give it a go.
I have been trying to get my car to crackle on decel, but not getting anything yet
Adjusted the closed throttle delay to 5sec
Changes the borderline knock table ,first row 0,2 Load cell down but...
Try this one https://www.aliexpress.com/item/32948477134.html?spm=a2g0s.9042311.0.0.765e4c4dWROtSN
Have imported 2 of them in the last year, bolted to TTG's and they are happy in the 15psi range.
My turbo was on its way out.
bearings collapsed just a few days later.
Replaced it with a imported bush bearing turbo and its performing really well.
Yes 95 petrol
Boost is 12 psi but it does over shoot on gear change, but for some unknown reason(torque management) spark goes into the negatives on change over, and I think thats why it over...
Did a log today with the parameters
Noticed my throttle position pegg at 74%
88513
Ah, Great !
Got it in now and can see Celcius.
I have a 450 X 300 x 76mm in
With watermeth injection
87108
Okay
Graph is working now
So my MAD% is working 100%
AAD seems constant , as it should
But BAD seems to be not reacting and also constant straight line
I cheched the Math parameters ...
Well done!!!
Added to my scanner, getting the values but not the graph.
85862
I did a throttle relocation on my Territory, and also increases the cold side boost pipes to 76mm from 63mm
Now car idles the same drives ok out of boost
But my boost is down quite a bit , lucky...
Ok so I opened the box, checked all the solenoids found an open one, replaced it and its all good
So now I can carry on tuning.
Thanks Misk, i will get under it tomorow and check voltages at the plug.
So I have worked on my tune and getting to perform well @10PSI
But since the other day I have been getting an error that puts the car in limp mode
P0979
Now immidiately I thought transmission, as...
76990
Thanks Misk. I will try and upload the difference.
You wouldnt have a tune for an F6x to compare though?
Hi, I'm new here.
Got my HP tuner VCM this week, just getting to grips with it.
I have managed to download the current tune and when comparing it to the tune in the repository, it seem to have...