I see that livernoise having tunes for the 2021/2022 wondering if HP Tuners it?s almost out?
Type: Posts; User: =fast=
I see that livernoise having tunes for the 2021/2022 wondering if HP Tuners it?s almost out?
Guys what method you use to start a VE in open loop SD? let?s say on a new motor new injectors boosted. I have done 2 of my trucks and I start with the stock VE turn on car check airfuel and from...
I rent a dyno I couldn't make a good pass, the last run the back brakes where smoking, I just stop it there.
Guys I disable the traction control on the file, took off F1 and F22 fuse, but i fell like traction control kicks in on dyno. What else can i do?
Guys I?m looking for a tuner that knows his SD tunes. I have a 416ci with a acuffab 4 barrel throttle body, 80lbs deka, converter, headers etc.. on Speed Density open loop no o2?s.
I have it...
Guys my mpvi2 have the red light on and says Host, I plug it in on a vehicle and gives me that Host signal. What can it be how can I fix it? Have any one been trough this? Was working perfectly...
What it?s the meaning of Host and red light on, have it on my mpvi2.
I just use it a day ago I believe and it was working fine.
Guys will the scanner tell me if each cylinder it?s firing the same, or have the same heat? I use a heat gun to measure the heat on each cylinder when searching for a misfire. Would like to use more...
2017 Sierra trowing the U1510 and U1501, when I delete them I feel the idle bumps a couple Rpm?s.
Thank you will try it out.
I have a 2010 e38 ecm and would like to go VE SD mode I see this year don't give me the option like the 2009 Main VE or apply the 2 bar SD mode.
Would the VVE work good in Open Loop SD? Or there's...
Can we add more fuel pressure on a 2017 camaro? With stock fuel pump on it? I think it?s loosing fuel at WOT.
Guys I have Idle surge issue the cam its not big its a 227/232. VE tuning on open loop what else can it be? here is the file and log. I try bumping the RAF table and nothing my VE fuel error its...
Well, it’s there any school or someone who teaches?? For this new SD tables?
Well yea I was searching around, didt know this ones are SD mode.
I’m pretty sure the scanner have to set up To log the afr error?? Just don’t get the 28 tables of timing/VE/Torque.
I’ve download a file of a 2017 mustang just to check the VE tables, I think it was the right one that I was looking at, look like the MAF table of the 2015’s mustangs with MAF. Straight table with...
Veefour, yes GM it’s not that difficult.
The difference here on the non MAF fords now, will be logging all this tables or will one table work and the rest will be the same?
What about a bolt...
^^ that’s what I was thinking, the truck it’s e85 compatible so it should have some good fuel system.
So will you find the same thing on SCT? 28 tables for timing, VE, torque tables??
Do you do...
Planing on going with a single turbo Mount, I’ve seen they sell 2 Pumps for intank, on3 sell them. Just don’t say nothing about the fuel module.
How much boost this MAF sensor holds?
Guys my brother have a 2019 F-150 and would like to tune it see what can we do with it. I?m been tuning the LS/LT motors for the past years. I have check and mess around with the 5.0 mustangs back...
Looking into a 2020 f150 5.0, wondering if they have the same ecm as the 2019, and of hp tuners supported them??
Guys truck was running good after the stall converter installed it gave me a problem where at low speed if I let go the gas it will turn off out of no where.
12.2 drop 9 rwhp, 12.7 car put down 430
Yeap that’s all this car gave, try tuning it rich, lean it a little on the safe side, 4th gear pull, 3rd year pull 430rwhp was the most power it made.
Circle d converter and yes locked.