perhaps changing gear ratio or tire size will have a bad effect on tuning
...you haven't thought about it?
file blocking is a normal practice that protects shop from copying their tuning solutions...
Type: Posts; User: svvag2000
perhaps changing gear ratio or tire size will have a bad effect on tuning
...you haven't thought about it?
file blocking is a normal practice that protects shop from copying their tuning solutions...
Hello
I am developing user definitions for CM3230
but i discovered that vcm editor does not support user definitions for this ecu type
Is it so?
Use last version vcm editor
143594
you won't succeed
your file is not original
has tuning and some deletions
file was edited in raw binary format
therefore many maps and limiters are not available in vcm editor
you can leave it connected
valve doesn't work anyway
engine > fuel > Lean/Fuel-Saving
141621
hi all
has anyone already worked with titan XD with cm3230 control unit?
does hptuners offer enough parameters for tuning?
or do need to create user definitions?
plese share any stock file
in this case why specify this feature in vcm editor?
like most other functions that do not actually work :shrug:
125808
give more information
which control unit?
what do you mean "doesn't work"?
...HPTuner works great with usa and european version if there is an appropriate license
Hello.
Hptuners support mm8gm?
that would be great :drivin:
these are different ECU's
in wrangler GPEC4 in Alfa - Marelli MM10JA
car have Bosch EDC17C79
same ecu here
https://forum.hptuners.com/showthread.php?82857-HP-Tuners-Now-Offering-2014-2019-Ram-amp-Grand-Cherokee-Ecodiesel-Support&p=603324&viewfull=1#post603324
LBZ has poor support efi and hpt
best way use tool for read/write raw binary edc16 bdm100 for example and use winols
hello
you can upload here your file?
somebody can share gpec4 file
want to see what is hptuners offered for this ecu
raw binary file
has anyone already checked this?
maybe this help your
WinOLS_Demo_4.47 for Win7 x86
study this first
https://www.hptuners.com/vehicles/
Bosch ME7.6 not supported HPTuners
...will answer myself
just checked
type 8 7 6 5 and disable - no errors
type 1 2 3 4 - pending errors
i have same question for vag with MED9
dtc's have status: disabled, type 1, type 2 and etc
...to type 8
who can explain what these types of class's mean?
if you don't care here's an example of a connection for EDC17CP05 with TC1797
112166
112167
https://ecu.design/files/ecu_pinout/bosch_edc17cp05_irom_tc1797_ford.pdf...