Search:

Type: Posts; User: outlaw_50

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. You can modify it from Delta Temp (-397 C) all...

    You can modify it from Delta Temp (-397 C) all the way to the left side (-543.8 C) ie. 0.84

    I think Delta Temp is calculation difference between the inlet temp and the EGT.

    Also under component...
  2. You're limited because you've got some knock...

    You're limited because you've got some knock retard in all cylinders except cyl. 2

    It would be better if you only logged 3rd gear WOT so you could address the issue
  3. Replies
    8
    Views
    2,075

    Yeah you can adjust the quantity of fuel using pw...

    Yeah you can adjust the quantity of fuel using pw or playing around the pump pressure
  4. Replies
    1
    Views
    71

    No not by hptuners

    No not by hptuners
  5. Replies
    1
    Views
    77

    Use a Mercedes Diagnostic tool ie. Xentry to get...

    Use a Mercedes Diagnostic tool ie. Xentry to get the manufacture code and show you exactly what it is.

    As for the CEL light just put your key to ON position and check the CEL light on the...
  6. Replies
    3
    Views
    136

    Your Torque Management had some limits try this...

    Your Torque Management had some limits try this file out.

    I saw you only logged cylinder 1 knock sensor, for this platform you have to keep an eye on all the cylinders
  7. Replies
    3
    Views
    194

    Repository of stock files

    I'll add some stock files and everyone can contribute
  8. good to know !! Nice work

    good to know !!
    Nice work
  9. Replies
    1
    Views
    111

    stock 2016 5.0

    stock 2016 5.0
  10. good to hear

    good to hear
  11. flash stock file and check if they're still...

    flash stock file and check if they're still their, check coils and harness
  12. Replies
    5
    Views
    330

    could help you with that

    could help you with that
  13. Replies
    72
    Views
    10,694

    what about patching TPROT MED17.1 so we can...

    what about patching TPROT MED17.1 so we can write tuned files
  14. download latest beta

    download latest beta
  15. I would check with the tune supplier

    I would check with the tune supplier
  16. Replies
    1
    Views
    297

    in fact its better, play with it to see what your...

    in fact its better, play with it to see what your car likes
  17. Thats what vcm is bad with (the update) .....

    Thats what vcm is bad with (the update) .. always get pcm's bricked.

    I think your going to need a new pcm!!
  18. Attached CLS63 2013 5.5 Bi-turbo MED17.7.1 stock...

    Attached CLS63 2013 5.5 Bi-turbo MED17.7.1 stock file
  19. Replies
    2
    Views
    1,406

    just set them to type 6 in DTC

    just set them to type 6 in DTC
  20. Replies
    1
    Views
    817

    No, Its better for quicker response

    No, Its better for quicker response
  21. Replies
    1
    Views
    1,250

    be more specific, do you mean o2 sensor bank1?

    be more specific, do you mean o2 sensor bank1?
  22. There is no option to log which table is used,...

    There is no option to log which table is used, you have two options:

    - Try to figure out which stroke by the valve positions.
    - Or, just apply changes to all tables
  23. Replies
    12
    Views
    658

    As kevin87turbot said, its normal if you lift...

    As kevin87turbot said, its normal if you lift your foot of throttle
  24. Thread: E43 support?

    by outlaw_50
    Replies
    1
    Views
    949

    I dont think its supported, you may tune it using...

    I dont think its supported, you may tune it using Winols
  25. Replies
    19
    Views
    5,775

    I don't use the grounding method but I believe...

    I don't use the grounding method but I believe its the brown wire that gets grounded.

    The method I use is connecting the power wire (red) located in the pump connector to any 20 amps fuse in the...
Results 1 to 25 of 55
Page 1 of 3 1 2 3