I would adjust via the tip out as well.. but probably much more conservatively lol
Type: Posts; User: luciddeath
I would adjust via the tip out as well.. but probably much more conservatively lol
Did you adjust via the High Octane trim adjust table?
nevermind i see that was original file.
They are oem you need to adjust.
I have had this happen on a customers magnuson 426 build it was the throttle body gasket on sideways. Causing the blade to get stuck open on light throttle
I do remote tunes. Demigod tuning on fb. Theres no easy answer to this question.. i recommend googling your question and adding the word "hptuners" at the end to get good forum info
If you decide to get a remote tune lmk. Otherwise, start with the fa cot tables. Zero them out also on the bottom 2 tables
If you need a remote tune hmu please. Demigod tuning. There are tons of great info on the forums tho if you want to learn yourself
Message me some time if u like.. i can help
Hptuners cannot access the file i would assume.. seems like the security on these is something else
I tune remote all the time.. ive tuned tundras in the past. Most recently a 2019 tundra with a magnuson.
Ive tuned tons of pentastar v6 supercharged setups and can help. Message me here or on fb...
When you use hptuners to read a tundra.. it will download the stock file from the repository. Any tune file that it had is now non existent whenever u flash it.
I have tuned these in the past. Any...
I set them tp 3400 3200.. 12mph 10 mph. Good luck
I tune these a lot hmu on facebook .. demigod
I do remote tuning, can get you up in an hour and finalized in 2 or 3 days DEMIGOD on fb
your fueling is off quite a bit. is it a cammed setup, did you disable the neural network yet?
Firstly I would use the beta scanner to reset your tb. If that doesnt remedy the issue.. You could lower your commanded rpm a bit in idle tables
I offer remote tuning if you are interested.. demigod tuning on facebook. Otherwise, there are lots of great resources on here for learning.. though i don't recommend dodge for the learning curve.
Ill be home in 15 mins lol. I wanna help
quick fix.. turn off any FUEL SHUT OFF SETTINGS.. disable in your tq managment to start
I seen this before.. if you need a remote tune lemme know
here i adjusted the tune for you to eliminate that as an issue so you can diagnose your problem properly. Good Luck..
DEMIGOD TUNING on FACEBOOK
124345
Would need to see a log of the issue first.
Timing is really low.. probably just cheap fuel. it shouldn't need to be negative timing when you get on it
A lot has to do with the quality of the smart cables. I've had about 3 on and off work