Could I get someone to look at my tune and idle log and give me some feedback? I have a wideband but I haven't configured it to my scanner yet.
Thanks in advance.
97573
97572
97 Camaro LT1...
Type: Posts; User: mwc2
Could I get someone to look at my tune and idle log and give me some feedback? I have a wideband but I haven't configured it to my scanner yet.
Thanks in advance.
97573
97572
97 Camaro LT1...
Thanks for taking a look at it. I was suspecting a coil and I am going to use a thermal gun to see which one. Any recommendations on the tune will be welcomed.
Car is a 97 Camaro LT1 383 LE 236/244 cam, LE ported Intake, Custom Heads 58mm throttle body.
Looking for feedback on my tune. I do not have a wideband yet. Just looking for pointers.
Thanks in...
Update. Problem Solved. Maybe I missed it in the instructions somewhere because I already had a 16pin obd2 connector, but I removed Pin 6 in the connector and it works. I made a bench harness with...
Thanks for your help. I have a 1997 Camaro LT1 383 LE Heads & LE 236/244 .579/.578 112 LSA Cam with Racetronix 42lb injectors.
Thanks. I have the Torqhead kit. With that kit installed and the pcm reflashed with a Tech2 to the Express van OS will I need to change the firing order or is that done in the Torqhead coil wire...
Since I have access to a Tech2 would I be better off starting with a 02 Camaro 12212156 OS and change out segments? I can I change segments from 4x to 24x? Not sure about the later as I haven?t...
I know to use 12212156 OS but what is preferred form? From a 2002 Express or 2002 Camaro? A Tech2 was used to load a VIN and OS from a 2002 Express van onto my pcm but before I license it with...
sorry duplicate post.
What are the possibilities that I have a bad MPVI 2? I can connect with other devices except the HP Tuners MPVI 2. Tech Support (Ticket #193271) is telling me that they do not see the ECM reporting...
Just posting current status. Still cannot connect to HP Tuners.
I built a bench harness that I can use to connect to the pcm with a Tech2 and an OBD Book but not HP Tuners. I found the VIN off a...
Thanks. I am still having the problem. Even built a bench harness. I can connect to it with everything except HP Tuners. "Data Protocol Failed". I even used a Tech2 to write a new VIN number...
Keith at PCMforLess said that he uses TunerCat. The whole point of sending my pcm back was because I could not connect with hptuners. He was going to make some changes and was not sure why I wasn't...
I couldn't get the VCM Scanner to work. Kept coming back with an error message about unable to connect and unsupported. I should have screenshot it to say exactly.
I'm not doubting you. I am just surprised as I told him that I needed to access it with hp tuners and that is why I sent it back the second time. Only this time I believe that VATS is turned on and...
I would hope that it isn?t tuner locked because he knows that I needed to be able to connect with hptuners. Anybody here program Torqhead pcm?s with hptuners?
I need help! I did the Torqhead 24x swap and sent my pcm to Keith at PCMforLess. I got the pcm back and the car ran but needed some tweaking. I bought hptuners and couldn?t connect. Data Protocol...
Thanks but that is for an LS computer. I have the Torqhead pcm that uses the LT harness for the pcm.
Thanks for the response. I have a Torqhead 0411 pcm that has the LT1 OBDII connections. Do you know where I can find a bench harness for this pcm? I haven't found any that were still being made.
Hello,
New user here. I just completed the Torqhead 24x 0411 pcm Conversion and I got a mail order tune from Keith at PCMforLess.
He did my previous mail order tune for my set up which is a 1997...