What I?m trying to say is there are multiple tables that control fan speed.
You changed the desired % vs ect but did you change the desired vs ac?
I bet those are fighting each other and your...
Type: Posts; User: fifty
What I?m trying to say is there are multiple tables that control fan speed.
You changed the desired % vs ect but did you change the desired vs ac?
I bet those are fighting each other and your...
on the 2008 corvette zo6 7.0l tune...The Fan desired vs ect says the fan should be calling for 23 pwm signal at 203
So what can you do to tune it? You can adjust the tables in the fan portion of...
Check the fan/cooling section of the tune. Also if there is an hvac area.
I don?t know if there are any adjustments for those in the codes section. But you are going to have to look around.
Again...
There is more than just that one table commanding the fans.
There is an overall target table, there should be an rpm target table as well.
I don?t have the 08 corvette tune. But in the Gm tunes...
Is there a vid somewhere for those of us with mvpi2? If we want to get the 3 on how to transfer everything?
I’m computer dumb but my tuner said to get the 3 for the next round.
Hey everyone. I have a HP laptop that I have been using for HPtuners.
it has:
Processor Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz 1.80 GHz
Installed RAM 8.00 GB (7.84 GB usable)
System...
Yes it will! Update the newest beta. I also really truly do recommend getting your TCM unlocked
Is the delay from depressing the paddle shifter to when the transmission starts to shift adjustable via hptuner?
I know on the GM vehicles it?s bcm controlled and so far not adjustable (vette gets...
Did anything from suspension ever come to light?
I think early in 2020 hptuner finally updated/unlocked parts of the OS that let the gear and tire wizard reprogram both the speedo and also the tc/abs that the cruise control uses.
So you may want...
I noticed the other day that the save icon was greyed out and in the file menu, save and save as were not functioning. So I opened a ticket and started stressing.
I then realized that when I...
Looks like an external thermostat controlled bypass is in my future then.
Thank you!
That is extremely helpful thank you! That helps me determine which way I run my lines!!!
I think I’ll need to put the truck back together with current cooler and hold the lines and see if I can...
Anyone know if there is a thermostat bypass built into the oil filter housing... or where the oil cooler lines exit the block?
Or is it constant flow utilizing the coolant to bring oil up to temp...
You have to change some of the perameters that it will never meet. I think it was minimum temp or rpm etc or something. But just selecting dod off won’t do it.
I’ll have to go back through my...
Anybody know if the oem computer/bcm is sending 12v constant to the pwm fan? Or does it only send power if there is a signal being sent as well?
My truck (18 Chevy) and oem uses a single pwm...
I wish. Ive been searching, but maybe my search terms were incorrect
So if I use a separate pump that dumps into the fuel filler neck, there will be no codes unless it is filling during a diagnostic moment?
That would be awesome and ideal.
When I mentioned the bcm...
Thank you... (I really could bend your ear about if there is a way to reverse the pwm signal sent by the bcm from 0-90 to 90-0 like the holly can, and if there is a defroster part of the tune not in...
Is there a vacuum code associated with the current trucks gas tank?
I want to add an auxiliary fuel tank and would plumb the pump to fill the oem tank through the gas filler.
Since the trucks...
I?m looking to swap the rear axle in a 2018 colorado which is a m220, D46, D44 HD depending on who you ask. I believe it is a 48 pulse abs count.
To a current Gen GMC Yukon or maybe a built 9...
He got back to me the other day. He is trying to clear back logged updates. Try reaching to him directly again.
Apparently he has been spending the time trying to catch up
Before he takes on new work.
He just responded to me about remote tuning my colorado and giving it another polish based upon the parts...
Yea that sucks. As he is one of the few working heavily on the v6 platform
Will at overkill solved all of the lfx, lgx, lgz with edelbrock supercharger check engine lights and tune hiccups.
Sadly he is slammed and unavailable. Only other person I have found to have a...