Search:

Nope, battery had 11.8v with ign on, tender on it as we always do, and no wiring issue. I waited 30 min, tried again and got to 60% with boot loader download. Tried again later in the day and it...

Now HpTuners is accusing me of altering a vin on this vehicle and that one file isn't a virtual download, lol. Both files are virtual downloads from the same vehicle and have different serial numbers...

2019 Ford Mustang

licensed the file and went to load it in the vehicle. Keep getting an error message with the boot loader download. Gets to 4.6% sometimes and other times as high as 24%. Car is...

POSTING THIS SINCE THE OTHER POST WAS CLOSED NOT ALLOWING ME TO COMMENT BACK.

Quote Originally Posted by Camaro6 View Post
I recently installed a hptuner PCM that an owner purchased vs unlocking...

I recently installed a hptuner PCM that an owner purchased vs unlocking his orig computer in a 2021 Silverado, did the VCM scanner replace ecm function, immo learn & crank relearn with GM MDI2, read...

Why don't you take it back to the shop that originally tuned it for a retune? I just tuned one of these trucks last week which ran out of fuel injector on the stock ones. I put Ford racing ones in it...

Stock TB or you put a 95mm? Stock tables work on your listed mods as I do them all the time. I don't see your tune added either to look at it to see where you went wrong.

It doesn't allow you to license the tcm which is what's weir, but I did figure it out. MPVI3 & the latest beta version after updating it today, read the car and had issues. Had issues before updating...

2016 Dodge Challenger - cannot license the tcm
2020 Charger scat pack - cannot license the tcm

I can read the tcm on both vehicles without issue & computers are unlocked. I tried 2 different MPVI...

Has there been any development for trans control 4L60/4L80?

F35 cam works well on the 5th gen platform. I've done a bunch of them & have the cam in my nephews 5th gen which my sister in law drives as well. I see you have it idling at 1,025 but that cam will...

One look at that log and willing to bet anyone that it's tune related. That surge issue I see all too often. Look at your timing drop so far because the tune isn't correct. If you put your foot on...

I call BINGO:hi:

It will crank and run, but go into limp mode making it run poorly. Injector harness has pins different at the engine harness on some. Ecm simply thinks it has a sensor error, but nothing more than...

I disagree. Flex fuel on 2020 Edge ST without any issue for 4ys and 30k+ miles. Done it other models as well with great results. It can be done if the tuner is smart enough to figure it out. My pump...

145086

Here is a 2020 Edge ST stock file

Should run it flex fuel for the best power. Plenty of people and Ford tuners claim you cannot do this and argued with me over it back in 2020. Just because someone cannot figure it out, doesn't mean...

You have the wrong fuel rail on the vehicle? You cannot swap rails from 16 to a 17 or 18, and 19+ are different as well. You can physically plug the drivers side harness into the engine harness but...

Does someone have the xdf files for lml, asking for a friend of course........

You have too much timing/throttle control for the "in gear" areas and converter needs to be loosened up in the tune. Idle will always chop more, but they can chop in gear stopped and when coming down...

I have tuned plenty of those.

Actual knock or false knock to pull the throttle closed and limit the engine output? Need the tune and log posted to help.

Give it more cranking airflow in the tune for that coolant temp area if a little throttle starts it.

My 2020 Edge ST runs strong, lol Stock parts other than different spark plugs running E85 at 22-24psi for 30k+ miles. Only issue I had was the front axle shafts began to shake the car after a bunch...

Vehicle should be making alot more power than you posted......... It's a good cam you have, we use them all the time in these cars. You can DM me