thats a great find !
thanks
anyone know how to log when pe goes active ?
Type: Posts; User: 3barboost
thats a great find !
thanks
anyone know how to log when pe goes active ?
do you have a wideband ?
and yes the jtec seems pretty simple but due to the simplicity it is actually very bloody complicated
you will likely find loads of corrections in power enrichment etc
...
Hi, have you found a way to log when the PE goes active ? to me that would be a massive help on these older ecus, i am sure a flag must be set, and it would be great to see in the logs?
if you...
havent tried putting stock injecotrs back in
what other info would you need ?
Help please
Ok so a 1997 Jeep XJ fitted with 800cc injectors in prep for boost (GM 2bar map sensor on order and waiting) so still utilising the stock map sensor, but taking the oppurtunity to dial...
ok so as to a follow up on this
if the laptop battery / power drops off during a flash, on this 1998 Jeep XJ just re power the laptop and begin to flash a file (I have now done this successfully...
yes and i have a file converted that way
pretty sure the hp tuners tune translation is BIN to HPT
not HPT to BIN
how would I change hpt to bin ?
think I can force recovery mode on the ecu
Hi
Only have obd tools. including Genius Dimsport master
Hi, help please on how to do a recovery ?
I have a jeep XJ 1997 model with Jtec ecu, the ecu has been flashed many times getting the map and injector scaling close, then the damn laptop did a...
hi, thanks for that, so the oem scaling was 244 with the factory 105 max kpa sensor, you fitted the aftermarket sensor and changed the scaling to 260 instead of the 122 often seen
is that 58 kpa...
Thanks for this, have you got an example of the values / what the finished tables look like ? I am heading down this path at the moment - in this case a picture would be worth a thousand words, I...
hi, can do logs, not sure if i can get the stock tune, let me look for it - the car had been previously tuned
what I have seen in comparing this file with other vw ones, is in this definition...
Hi all,
help and insight please on a golf 5 gti dsg with a chinacharger k04, oem equivalent diverter valve, twintercooler, ebay intake, autotech hpfp upgrade, s3 injectors, full exhaust (3inch...
Hi
Looking for a means to fully and always disable the traction control on a 2007 Jeep JK 3.8 v6
Any ideas and pointers welcome (software solution first otherwise, perhaps and arduino and a relay...
good info, also keen to know more about adding boost to the xj
Hi interested to know how you got on with the xj turbo and what changes were needed
any map sensor scaling changes ?
could a 3 bar sensor be wired in ? and scaled accordingly ?
feel free to...