Search:

Type: Posts; User: Omunoz

Page 1 of 2 1 2

Search: Search took 0.00 seconds.

  1. Replies
    51
    Views
    797

    im not really good at explaining in a short form,...

    im not really good at explaining in a short form, is always best if you get injectors with data, so you dont have to guess.but the following might help....
  2. i have a 98 and can tell you hp tuners haven't...

    i have a 98 and can tell you hp tuners haven't enable this without the code triggering same with 02 sensors, you can disable them but you will get a check engine light
  3. on this engine you mostly use egr off tables...

    on this engine you mostly use egr off tables since the jeep dont have a egr valve , i will start with 1 or to degrees from 1k to 48k and 30kpa to 100kpa , theres many ways to add this ,like by...
  4. you sure can, mostly from 2k-48k rpm , i can...

    you sure can, mostly from 2k-48k rpm , i can tell you the on my 4.0 stroker i have up to 8 degrees on some point and is been taking good so far
  5. Replies
    51
    Views
    797

    You have to adjust battery offset to accommodate...

    You have to adjust battery offset to accommodate bigger injectors
  6. Replies
    51
    Views
    797

    you should install the bigger injectors, stock...

    you should install the bigger injectors, stock injectors are very small , thats why you are leaning out so quickly, i have ls1 28# injectors and it runs ok,
  7. Replies
    51
    Views
    797

    can you post the afr at part throttle and wot

    can you post the afr at part throttle and wot
  8. Replies
    51
    Views
    797

    whats are your afr

    whats are your afr
  9. Replies
    51
    Views
    797

    do you set the min and max baro to 1?

    do you set the min and max baro to 1?
  10. Replies
    51
    Views
    797

    we will get there soon

    we will get there soon
  11. Replies
    51
    Views
    797

    what engine set up do you have? if you don't mind...

    what engine set up do you have? if you don't mind sharing
  12. Replies
    51
    Views
    797

    awesome progress , you would have to post future...

    awesome progress , you would have to post future tune in the forum, repository doesn't work . good work!!!
  13. Replies
    51
    Views
    797

    i will keep trying as well this afternoon, see...

    i will keep trying as well this afternoon, see what i can come up with
  14. Replies
    51
    Views
    797

    are you running open loop

    are you running open loop
  15. Replies
    51
    Views
    797

    did 122 scale work for 2 bar map

    did 122 scale work for 2 bar map
  16. Replies
    3
    Views
    68

    would you mind sharing the numbers you input for...

    would you mind sharing the numbers you input for map sensor characteristics, to my understanding you have to scale below 105 kpa to avoid fuel cut off
  17. Replies
    51
    Views
    797

    i been running a turbo on 98 tj for the past 3...

    i been running a turbo on 98 tj for the past 3 years with split second piggy back, my next step is to do same you are doing ,to cancel split second piggy back
  18. Replies
    51
    Views
    797

    you need to post a log and tune to get help

    you need to post a log and tune to get help
  19. Replies
    13
    Views
    302

    2001 jeep ecm has different table set up, to make...

    2001 jeep ecm has different table set up, to make the changes,like Nytrocharged is suggesting.
  20. Replies
    0
    Views
    97

    Jtec map sensor info

    does anybody know what measurements this parameter are in? thank you in advanced
  21. Replies
    0
    Views
    92

    looking for 98xj AT stock tune file

    anybody with a tune file from 98 jeep xj with automatic trans. any help will be appreciated. thank you
  22. it should be under general, but if is not working...

    it should be under general, but if is not working you should send a ticket to hp tuners, by the way I have similar set up, 4.7 stroker on a 98 tj, what injectors are you using and did you adjust the...
  23. Replies
    0
    Views
    148

    Jtec spark retard log in scanner

    thank you in advance, is there way to log spark retard, i have a 1998 jeep wrangler, i don't see a quick option like on gm to add a channel to log timing retard, any help would be appreciated.
  24. Replies
    20
    Views
    1,293

    did you figure this out, how is the added timing...

    did you figure this out, how is the added timing working out on the jeep it seem high ,but then I don't know your set up, I have a 98 sahara stroked 4.7 tuning in the process,any info would be...
  25. Replies
    10
    Views
    675

    not sure why is at zero, but my jeep 4.0 tune and...

    not sure why is at zero, but my jeep 4.0 tune and most of the 4.0 with jtec up to 1999 ive notice is at zero, maybe someone can help on explain what is about
Results 1 to 25 of 30
Page 1 of 2 1 2