That flex fuel file will help a lot. I have a ecotec swapped Miata that I added LE9 injectors too but could not find the data for them. thanks!
Type: Posts; User: Vasquezz1228
That flex fuel file will help a lot. I have a ecotec swapped Miata that I added LE9 injectors too but could not find the data for them. thanks!
I bumped the IFR table to 52lb and I’m reading more air through the MAF and the car seems quicker. I’m up to about 16.5 lb/hr now. I adjusted the maf with my wide band so the fuel trims are off. I...
I will be trying this today and report back. I am running fuel pressure regulator with vacuum reference and a return line. I have since changed the IFR table to the same value for the table and made...
I have the MAF pretty spot on. I am only getting about 15lb/h through the MAF now. Better than the 10lb/h I was getting with the IFR at 28lb. I have it at 40.3lb now. I was thinking of trying 36lb...
You were right the injectors are much larger than 28lb. I tried different flow rates and adjustments made to the MAF after changing the IFR table has made the car perform better. I don?t know the...
A 2009 hhr with flex fuel, I couldn’t find one to read the exam so I went with an hhr file from the repository that had flex fuel active.
I?m using the LE9 injectors. I believe they are 28lb from the flex fuel hhr file I found. I might try changing the injectors to the Saab 33lb. Maybe I have the wrong flow rate for the injectors
Update:
I changed the throttle body to a stock 2.4 throttle body and also made the changes to the torque management tables with no success. the car is still giving me the same issues. i logged the...
I will try this. I have so far changed the intake gaskets, added a new map sensor and cleaned the throttle body. the car responds a little better but still having the same issues. I am thinking it...
I have installed LE9 injectors for my 2.2 LAP swapped Miata. I was running siemens 60lb injectors before and one went bad, I installed a set of red top 33lb Saab injectors and tuned the car without a...
Found the file I needed, having a different issue will make a new thread. this can be closed or deleted
I have purchased the injectors for an LE8 or LE9 for my 2.2 LAP swapped Miata. I was looking for the data of the injectors and looked in the repository but could not find any files for 2009-2011 HHR...
I am having the same issue. I connected the fuel gauge but cannot get a reading other than empty on the fuel gauge. mine is a 2000 S10 2.2 and swapped in a 6.0 with the PCM coming from the same truck...
The LNF engine requires a BCM to run properly. If no BCM is detected the engine will only rev upto about 3000 RPM.
I had the same issue on a 2004 Silverado. I hooked up my battery charger to the truck and unplugged the pcm for about 20 mins. Plugged it back in and flashed. Had to do it everytime I flashed that...
Email support, I had the same issue on my 2016 ats and sent them my file and info log and then sent me an update of the software and I could flash the car and read ethical percent. Also be sure to...
The stock fuel system on the ats will not support full e85. You will be able to run a 50/50 mix of 93 and e85. That is the info I received from zzperformance when I purchased they?re e85 kit that...
This happened to me on my 2009 g5 with the LAP. If I recall correctly I had to turn off the torque management portion for boost and supercharger control. It helped a bit but what helped me was adding...
I believe there is a physical limit to them and the valves will not hit the pistons. I have had the actuators fail on my old G5 with the LAP and never had any interference from the valves.
The...
My 2016 ATS was only 2 credits
Sent in a log the tune and an info log as well. Got a response within 2 days and then they updated the beta and sent me a link to it. After that it worked and I been running 50/50 blend while I...
Disable diff scoring. That was an issue for me when I had my 2009 G5 supercharged
How are your fuel trims looking? I have noticed this ecm won?t go into PE when the fuel trims are off by more that 20%
Hasn?t always been the case but has happened to me on 3 different cars.
I did when I first installed the sensor and sent a copy of my file but never heard back. Did you send an info log with your file?
Yes zzp sensor and latest beta version. I took the file out and the flashed it.
Even used current version of the normal vcm