Hi there,
I managed to get my new engine and cam breathing ok on open loop editing the VE tables, but the moment I give her her computer control back she goes from stoich and running fairly ok to 20AFR and running like crap. I've tried tuning it TO the closed loop trims, which kinda worked but seemed messy and imprecise and the 3d looked like a mountain crag. The current tune i've got has closed disabled by upping the CL Prereq temperature to 300+ and editing the VE tables. I also spent this morning getting the enrichment table for temperature somewhere close to happy, so hopefully that won't be causing any issues, but I can't seem to find anything on how to modify the short or long term fuel trims for the 2007s. I've tried clearing the adaptives to see if maybe thats the issue, but no dice. I've posted the most recent logs with and without closed loop and my current tune with it enabled but the VE tables pretty much just set up to run in open.. Anyone able to take a look and see if im missing something, or maybe point me to where i need to be looking next? Is there a multiplier that's screwing me up when the delay is up and she bumps into closed loop that i can just balance out and be good, or do i just have to tune it to the closed loop setup? I'm sure i'm coming off as extreme newb but well... i am, so i guess thats appropriate. ^_^ Be gentle please Also incase it wasnt obvious, Luna is my car's name.
Thanks guys. This has been...quite an experience. Scary, tinkering this deep into my car, but rewarding knowing that my changes are helping her breathe better and seeing her sigh comfortably when i get things balanced is nice.