Anyone having issues getting injectors to write correctly thru HP everytime we write the data for the FIC injectors to the STi car will flood out instantly. We are using Beta with the patch. HP says nothing is wrong on their end. Car had cobb accessport which has been uninstalled.
I've been holding off on installing my ID 1050's for this same reason. Following the thread for updates.
So it is with hp went with diff software and they load just fine. I will wait till they have this figured out, as a business I cant afford to waste time and money
.
What do you mean when you say, "So it is with hp"? You're saying that the issue lies with them specifically?Originally Posted by KevinW
I would say it lies with the software as in the way it is written to the ECU. I have over thirty different tunes that were written to this car. every time with no error codes. so as far as i can tell map was written. Installed the original base tune that was pulled form car and tuned first time with another software. Thru all the support tickets I was told that all the patch and beta versions were correct. So my only conclusion is that something in the software is not being interpreted correctly on this one model. Oh Just FYI we never bricked this ECU. We still use HPtuners on our other tuning jobs. Just reluctant to try again on a Subaru at this time.
Screenshot 2024-05-17 210256.png
I think I figured out the 1050x injector data issue. The format is incorrect. Its not actually lb/hr but a weird format of the raw data. I flashed my 2020 sti with ecuflash to test it. Car started just fine and was 14.7 at idle. I then read that tune with hp tuners and saw the value was lower instead of higher for the larger injectors. The reason I'm not sticking with ecu flash is I still don't have all the table needed to tune the 2020 and I really like VCM Scanner for logging over romraider.
Reply With Quote