Page 4 of 5 FirstFirst 12345 LastLast
Results 61 to 80 of 97

Thread: Cold start issuss

  1. #61
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by edcmat-l1 View Post
    You're asking for advice and pretty much refusing the post a new, current data log?
    When did I refuse anything, I ask for advice I posted the log 7 months ago and still have the same issue with 0 changes, nothing was ever resolved, if it makes you happy when I get home from my job and after I take care of my kid all night I will find time to post you a updated identical log

  2. #62
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    4,403
    Quote Originally Posted by TYLERJ98 View Post
    When did I refuse anything, I ask for advice I posted the log 7 months ago and still have the same issue with 0 changes, nothing was ever resolved, if it makes you happy when I get home from my job and after I take care of my kid all night I will find time to post you a updated identical log
    Don't do it for my sake. I'm not the one who needs help.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  3. #63
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    3,597
    Thing is the bank-bank imbalance wasn't always there. Back at post #36 things look much better.
    https://forum.hptuners.com/showthrea...l=1#post764017

    Something changed. Other than a new set of injectors idk what it could be.

    Load the tune from that post. Clear LTFT's then upload a new log.

  4. #64
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by SiriusC1024 View Post
    Thing is the bank-bank imbalance wasn't always there. Back at post #36 things look much better.
    https://forum.hptuners.com/showthrea...l=1#post764017

    Something changed. Other than a new set of injectors idk what it could be.

    Load the tune from that post. Clear LTFT's then upload a new log.
    That was when things changed which was log 4
    I was driving around the block and then I noticed from that day it had that imbalance but nothing to this day I can find, things I have done since log 4: it has new spark plugs, new wires, injectors were warrantied, smoke tested for vacuum, new o2 sensors, tested all coils. At this point im confused as physically I cannot find anything, but the pcm is saying that there is an imbalance. Even when you hit throttle or idle it doesn?t sound at all like there is a issue or misfire or anything

  5. #65
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    I will upload tonight

  6. #66
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    4,403
    What is the combo?

    Intake manifold
    Camshaft
    Headers, design, name brand
    exhaust system behind them
    etc....

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  7. #67
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by edcmat-l1 View Post
    What is the combo?

    Intake manifold
    Camshaft
    Headers, design, name brand
    exhaust system behind them
    etc....
    JEGS sheet metal ls1 intake, Btr stage 3 v2 truck cam
    Schoenfield 1302 ls1 swap headers, then it has stainless 2.5 inch exhaust no cats to dual spintech 6000 mufflers, it has snakeeater deka 80s in it, flat top pistons, bored .03 inch over, completely rebuilt fully machined engine, I have only put 3000 miles on it before having this happen

  8. #68
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    4,403
    I wouldn't worry about split trims to be honest with you. Not with that intake manifold.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  9. #69
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by edcmat-l1 View Post
    I wouldn't worry about split trims to be honest with you. Not with that intake manifold.
    But there are points where it can reach -18% while the
    Other is like -5% that?s where my concern grew. I mean like I said tho as far as drivability it drives totally fine and sounds fine, just the data log is telling me its off.

  10. #70
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    If that?s normal with the sheet metal intakes then I?ll just clean the fueling up a little more and drive it around and see what it does, I just don?t want to do any damage

  11. #71
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    3,597
    Like I said before it was fine now it's not. You didn't swap intakes did you?

  12. #72
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by SiriusC1024 View Post
    Like I said before it was fine now it's not. You didn't swap intakes did you?
    No nothing has been changed on this build at all, just randomly happened

  13. #73
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    4,403
    Those intakes are terrible.

    As long as the trims come back closer together with some RPM let it roll.

    Post a good long log with plenty of idle and part throttle driving.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  14. #74
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    4,403
    Quote Originally Posted by SiriusC1024 View Post
    Like I said before it was fine now it's not. You didn't swap intakes did you?
    Yeah that you would think would indicate something happened, changed, but in general I wouldn't worry about split trims with that type of intake manifold.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  15. #75
    Advanced Tuner abc's Avatar
    Join Date
    Jan 2024
    Posts
    282
    Have you smoke tested the exhaust?
    Checked header tube temp.?
    Inspected plugs for one not running close in color and temp. to the others?
    Run a leak down test?
    Compression test?
    Inspected valve train?
    Swap banks with the NBO2s' (and then the wiring if it will reach?) and see if it follows the O2s' or stays with the same bank.
    Seems more mechanical than digital if one day it was fine, the config. file not changed and the next day it's off by 15 percent.

  16. #76
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    3,597
    You did make adjustments to the FPR. The reg is downstream of the rails right?

  17. #77
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by SiriusC1024 View Post
    You did make adjustments to the FPR. The reg is downstream of the rails right?
    No I didn?t change it I just asked you make sure I was correct on it but it?s been 58psi from the beginning

  18. #78
    Tuner
    Join Date
    Jan 2024
    Location
    indiana
    Posts
    51
    Quote Originally Posted by abc View Post
    Have you smoke tested the exhaust?
    Checked header tube temp.?
    Inspected plugs for one not running close in color and temp. to the others?
    Run a leak down test?
    Compression test?
    Inspected valve train?
    Swap banks with the NBO2s' (and then the wiring if it will reach?) and see if it follows the O2s' or stays with the same bank.
    Seems more mechanical than digital if one day it was fine, the config. file not changed and the next day it's off by 15 percent.
    All plugs look same, I?ve swapped bank 1 for bank 2 on o2 and coils same thing, new O2s, smoked the intake for vacuum leaks, no exhaust leaks for sure before the O2s, so I guess from your list my next steps would be pop off valve covers check the rockers for any movement, and a compression test, however I?m going to drive it tonight and log it for everyone to see the updated log of what it is doing currently before I dig any deeper

  19. #79
    Advanced Tuner abc's Avatar
    Join Date
    Jan 2024
    Posts
    282
    I'm mostly in agreement with Ed, as long as I don't feel it, I probably wouldn't stress about it too much. I would do my due diligence as far as the health check/physical and be thorough with it in stages or all at once but, if no problem found, chalk it up to "it is what it is"!

  20. #80
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    4,403
    When I asked him what the setup was, and specifically asked about the intake, I could have guessed it had one of them shitty aluminum intakes with the little bitty runners.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]