3.6/3.2L V6 Alloytec (LE0/LY7) tuning

[Chris@HPTuners]

Guys,

You may have read here and other places that we were considering tuning for this engine on the various 04-07 vehicles this engine is used in.

The good new is, we have been running a beta for Holden vehicles now for a couple of weeks and things are going well. A few minor issues but nothing major. There are just a few more things to complete before we complete the calibrations for the US vehicles. We are not able to support the 5spd auto trans controller at this time (can still do engine tuning), but we do support the 4spd auto.

For those aussie tuners that are interested the vehicle support covers the following vehicles.

2005-2007 Holden Commodore Sedan (V6)
2005-2007 Holden Commodore Non-Sedan (V6)
2006-2007 Holden Rodeo (V6)
2007 Holden Captiva (V6)

I expect the first US vehicles to be supported in around 6 weeks time, starting with the Cadillac's.



Chris...

[EC_Tune]

Let me know if you need a particular vehicle. I can get a hold of some of the Caddy guys.

[zinner]

Awesome news!

[TNT76]

Which controller is in the '05 Holden alloytech is it E38, E40 or other?

[Bill@HPTuners]

other

[Overclock This]

other

Is it E67 since the G6 uses basically the caddy 3.6 motor?

[Bill@HPTuners]

no.

[zinner]

Why are the Alloytec engines 4 credits a VIN to license when just about every other VCM is 2 credits per VIN?

It seems odd especially since the transmission isn't supported (A5).

[Rovsche]

Hi Chris,

Do you support Chevy Captiva 3.2l 5AT GM-DAT version which is exported to Uzbekistan?

[Rovsche]

and please give me your e-mail, send it to PM
tnx