EEC-V Support

[Bill@HPTuners]

I have a 2004 Cobra. Supported vehicle list says Mpvi2 only works for this so that is what I have been using. Do I need to log with Mpvi3 and tune with Mpvi2?

MPVI3 scanning is likely going to be better for EECV, MPVI3 editing/flashing are going to work similar to MPVI2. If you have one of each device we would recommend combining them unless you need them separately for some reason.

[fumanchu182]

Out of the box, if you hook up an MPVI3 to any EEC, it will tell you not supported until you get the EEC specific firmware.

Interesting thread I'm glad I stumbled upon it. I have both an mpvi2 and a mpvi3. I keep the mpvi2 around for legacy reasons. If I add the beta firmware to the 3 does this prevent me from still using it as normal for Mopar applications? I will create a support ticket today.

[Bill@HPTuners]

Interesting thread I'm glad I stumbled upon it. I have both an mpvi2 and a mpvi3. I keep the mpvi2 around for legacy reasons. If I add the beta firmware to the 3 does this prevent me from still using it as normal for Mopar applications? I will create a support ticket today.

it will NOT prevent you from using it as normal for Mopar applications.

[MikeK1313]

Hi, do you have 98 ford explorer 5.0 added?
The strategy is RAAD3.

[Bill@HPTuners]

Hi, do you have 98 ford explorer 5.0 added?
The strategy is RAAD3.

Open a support ticket with your .hpt file for review please.

[JL5.8]

Hello, if I update the firmware of my MPVI3, will I now be able to access the EEC-V of my Lightning 2002?

[Bill@HPTuners]

Hello, if I update the firmware of my MPVI3, will I now be able to access the EEC-V of my Lightning 2002?

You'll need the special firmware available by opening a support ticket with your device information.

[chuckk]

I have a customer with a 96 mustang v8 with an sct tune in it.

Can I use my mpvi3 to read/write his ecu ? I understand I need to send my mpvi3 SN to Eric for betta firmware ?

[Hubes]

Yes, pm Eric with your sn, and make sure you have the latest beta of vcm suite, then it'll work

[Kvsl21a5]

Hi I'm looking for help with being able to tune with my mpvi3 a 1999 Mustang V6 ecu

[Bill@HPTuners]

Hi I'm looking for help with being able to tune with my mpvi3 a 1999 Mustang V6 ecu

If you already own an MPVI3 I would suggest emailing support for the special EECV beta that you'll need in order to read your vehicles ecm so that we can map the definition.

[04silverado6.0]

Support ticket #482067. Was hoping to get a 1996 f150 5.0 added in. File and info log in the ticket with the vin.

[tunechy]

Support ticket #482067. Was hoping to get a 1996 f150 5.0 added in. File and info log in the ticket with the vin.

Were you able to read the tune for the 1996 F150 5.0?

[04silverado6.0]

I read the file.

[Nairbg]

Can you add the X100 version of the Jaguar XK8. particularly the 2003-2006

[Eric@HPTuners]

Can you add the X100 version of the Jaguar XK8. particularly the 2003-2006

Read and send to support

[Fenfinger312]

Think im in the right spot, 2002 Ranger 3.0L BRN3 strategy code, having trouble reading ecu its giving me iterface not supported error, has this eec been supported yet? I have not submitted this in the form of a ticket but can.

[Eric@HPTuners]

The catch code is supported, but you probably need the EEC firmware. Send me your MPVI3 serial number.

[Fenfinger312]

The catch code is supported, but you probably need the EEC firmware. Send me your MPVI3 serial number.

Messege sent, thanks.

[04silverado6.0]

Any update on the 96 f150?