Results 1 to 6 of 6

Thread: afr500v2 can

  1. #1
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,044

    afr500v2 can

    Just setup my v2 can for obd, waiting on the adapter to come in. Ballenger software is locked at 1hz for hptuners. Will i be able to request faster polling in the scanner? Id think 25-50 would be much better polling rate.

  2. #2
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,044
    Also, left my baud rate at 500kbps. Is that pretty standard or can i do better without stressing the wb or getting bad data?

  3. #3
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,044
    Ive got it up and running but havent had time to sit and play with the new wb. Ill see if i can learn more about it tomorrow and post back for the next guy. Just a bonus it will not poll the parameter if the obd2 passthrough is laying in the passenger side floor.
    EDIT: forgot to play with unit
    Loving the can unit for sure, not so sure about the bosch 4.9 i let calibrate 45-50 minutes. Seems more rich than normal compared to my dyno wb. Ill keep using the 4.9 on the 6 TN or chopacabra build i tune per week and eventually get a ntk and do some real cal work. Anybody questioning a can v3 unit definitely order the thing.
    Last edited by 04silverado6.0; 08-11-2024 at 11:55 PM.

  4. #4
    Potential Tuner
    Join Date
    Aug 2018
    Posts
    7
    1hz is not used by the AFR500 in HPTuners mode as OBD2 is request/response, If you want a faster rate you can right click on the channel and change the `Polling Interval`. The 500k Baud rate is not changeable OBD2 communications breaks if you change it, it's a set OBD2 standard.
    polling.png
    Last edited by morganf; 4 Weeks Ago at 10:19 AM.

  5. #5
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,044
    Thanks for the response. I have been using this a lot but have not adjusted polling interval. Whatever default is seems to be working fine. I completely forgot to play with it as the response seems just fine.

  6. #6
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,044
    If they end up having good support for the bosch adv id like to upgrade to a v3.