Can anyone help me understanding misfire timing. And why My log files show it most of the run
Can anyone help me understanding misfire timing. And why My log files show it most of the run
the non highway run skip to end
Just diseable missfire
03 cummins,175% flux injectors,dual cp3,s467.7/83 1.00
Nv5600 with valair triple disc clutch
Was not sure if that will affect anything or not , another question is why is it doing it?Originally Posted by MAIDENCR
I dont know...but when active it will go in the missfire timing table....
03 cummins,175% flux injectors,dual cp3,s467.7/83 1.00
Nv5600 with valair triple disc clutch
Is anyone else just turning it off in there tunes?
The simplest answer is if it didn't do it before you started changing things in the calibration and does it after you've changed things, then it's something in what you did that's triggering it and easiest way to find what is is one table/parameter a time put it back to stock till you find what it is that's triggering it, or can just turn it off like mentioned above and not worry about it.
Reply With Quote