2016 C7 Z06 MAF curve

[ADAM99Z28]

I have a customer with an On3 twin turbo kit installed on a 2016 C7 Z06, he removed the LT4 charger and installed a BTR trinity intake. My question is there a way to enable the maf 2 table on the z06 since it runs out at 11000 hz and the vve is relatively small compared to a base c7 stingray. Since the On3 kit is set up blowing through the maf I am fairly certain I will run out of maf and vve table well before the 14lb gates open. Just looking for any help before I start tuning and run into a bunch of problems. Thanks

[edcmat-l1]

You won't run out of either. The MAF axis is scalable and all GEN4 and GEN5 VVE are 3 bar. All you have to do is change the axis to view it. It is always there in all vehicles. If you're not aware of these things I wouldn't be tooning customers' cars. Or at least let the customer know you don't really know what you're doing and you'll be learnin' on their car.