Editing axis values in tables - comparing 6F35 Escape/ Kuga platform.

[ynot]

I was wondering if the table axis increments/ maximum values can be edited. Or, if not, what controls the maximum value?

See two tables below.They're from similar spec vehicles that both have the 6F35 - a Valencia built 2016 Kuga with 2.0l EcoBoost (top table) and a US built 2017 Escape with 2.0l EcoBoost (bottom). Notice the maximum torque value on the table- the Kuga max is 305.1Nm and the Escape is 366Nm.

Torque increment differences.jpg

(That's not the only table that has differences in the maximum values, just an example.)

The table's axis values can't be edited- only the table contents can. So I was wondering how they're set, or if it's something that isn't enabled on the HP Tuner software?

[ynot]

Answering my own question:

Right click on the table and select "Row Axis"-> "Edit" for the table side axis; (or "Column Axis" -> "Edit" for the top row axis.)