Results 1 to 3 of 3

Thread: Need help Stage 2 cam P0106 code traction control is off

  1. #1
    Potential Tuner
    Join Date
    Dec 2024
    Posts
    1

    Need help Stage 2 cam P0106 code traction control is off

    I just installed new stage 2 cam into my Caprice 2007 royale equipped with gen 4 5.3 and disable vvt/dod after installing car wont start up easily i had to step on gas to get the engine started and getting code P0106 and keep getting into safety mode i tried every thing what should i do? my map sensor reading on idle around 80kpa
    Note: filter and exhaust is still stock
    Last edited by Mazinbukhari; 12-12-2024 at 08:30 PM. Reason: More detail

  2. #2
    Advanced Tuner abc's Avatar
    Join Date
    Jan 2024
    Posts
    942
    Diagnose and repair the code. Post the .HPT and .HPL Read this https://forum.hptuners.com/showthrea...e-(w-pictures)

  3. #3
    Senior Tuner
    Join Date
    Nov 2006
    Location
    North Carolina
    Posts
    4,831
    That code is common with cam swaps. Open up the limits for it's diagnostic.
    [email protected] - [email protected]
    Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs