Did you end up getting that place you were talking to me about?
Did you end up getting that place you were talking to me about?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Originally Posted by Bill@HPTuners
Yup... finally got an agreed upon price today (38k down from the amount they had it listed at at first)
so now just gotta drop off the ernest... house inspection next week, and then closing will likely be on the 13th or 20th of august
Mike Horist
00 WS6 (TA) | 04 WS6 (GTP Comp G)
Mike \\#at&\\ horist \\&dot$\\com
BOTH cars HP Tuners Tuned
Or could it be that you kept getting stuck in Keith's planters, so you took off the body. Are we going to have to send you guys to your rooms, if you can't place nice.Originally Posted by Ken@HPTuners
LACR will be after 4pm, so you will have plenty of time for a little nookie and to sleep off the hangover.Originally Posted by Ken@HPTuners
looks like my truck got a little close to some of the other trucks during the stay in Chicago... now i have two of them! I hope they keep multiplying
I count sheep in hex...
Just like an Aussie to have an HSV... Are those things like rabbits?
BTW: If they keep multiplying like that, send some of their offspring my way. My son needs a hobby... LOL
Looks like you guys have a new hobbie too! And it looks like it's a little TOO much fun. Get to work now!
Always Support Our Troops!
yeah we bought a new (clear) body and painted it up in the Holden colors with the help of some pre-cut Holden/HSV vinyl masks. You paint on the inside so it's not too hard to get a great looking finish
I count sheep in hex...
Very cool! Makes sense too as you don't ding the paint when Ken runs over you... LOL
Wish I had a clue how to paint (other than fences & walls). My artistic abilities run right up there with Stalins ability to show compassion.
Always Support Our Troops!
While Chris is adding vehicles Im breaking them lol
http://www.thetuningdoctor.com/HPTun...9-07%20066.jpg
In between answering emails this weekend I was able to get a little time alone with one of the little ones. Unfortunatly my luck at the park across from my house wasn't very good. The first couple of bumps weren't too bad, but then I decided to push my luck & take on a park bench at about 20mph hehe.
Dissassembly is now complete & I'm just awaiting replacement parts which for the most part have already been purchased including several extras if I happen to break anything else along the way.
BTW if your counting
Thats a cracked Driveshaft
Bent spring pushrod
Broken upper & lower aarms
1 cracked axle carrier
Last edited by Bill@HPTuners; 08-19-2007 at 11:27 PM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"