vcm controls and 2.1.18

[mce]

Since i upgraded to 2.1.18 last week i have lost the use of my vcm controls in the scanner ie; i cant lock trans into 3rd gear , add or subtract timing , can anyone help please

[Arron]

Hi mce
I just had a look to see if it was the same for me and the AFR and spark controll seem to work for me with the vcm controls although the afr that i command dosn't match the reported AFR from the car . It's not out by much (.1 or there abouts) but it is working .
The Tonner is an M6 so i coulden't check the trans lock .

That was using 2.1.18 0

P.M sent

[Arron]

Mce , is the problem you are having with the VCM controlls just with one type of car or is it with all the cars you look at ?

[devildog9999]

Is the scanner itself running and logging data?