Help reading Scan file(Updated W/ Scan File)

[snatchss454]

Hey all I must admit defeat here. I tried learning on my own how to read this stuff but its all greek to me. Could I get some help here. I also tried doing what FOFF said and remove Dynamic Cylinder Air but couldnt even do that .
Im freaking hopeless, I did save it in a .csv format however. I can email to anyone willing to help a newbie tuner out until I can get it hosted.
Thanks,
Shane


**EDIT**
Im only able to drive 25MPH(Military Base) so the 75MPH was really pushing it!
[glow=red,2,300]The First link is just the WOT Portion:[/glow]
http://amoxsoft.com/mike/new2/view.p...n=Display+Scan

[glow=red,2,300]The Second Link is everything from startup to the WOT area:[/glow]
http://www.atruscorp.com/images/uplo...15f103038f.csv

[xonelith]

Hey all I must admit defeat here. I tried learning on my own how to read this stuff but its all greek to me. Could I get some help here. I also tried doing what FOFF said and remove Dynamic Cylinder Air but couldnt even do that .
Im freaking hopeless, I did save it in a .csv format however. I can email to anyone willing to help a newbie tuner out until I can get it hosted.
Thanks,
Shane

I can help you with the basic stuff (ie removing dca from your scan).

To remove the dynamic cylinder air PID (ensure you are not 'connected' to the PCM):
select the 'Table Display' from the menu in the scanner
select the item called 'dynamic cylinder air'
Right click and select delete
When you close the scanner, it will ask if you want to save. Say yes and save it some where. My setup automatically loads this config.

Hope that helps

As for the actual tuning, I'm still learning so I would probably give you incorrect info. ;D

[Bill@HPTuners]

also the help file located in the scanner/editor/flash is very helpful and should be the first thing read by people that have little to no past tuning experience. Im not on aim alot but if you catch me on there you can always ask away & I'll try to help you out as best I can...or just email me & I'll try to walk you through, but during the day its mostly by memory since I dont have the program on my work computer.

[snatchss454]

http://amoxsoft.com/mike/new2/view.p...n=Display+Scan

Uploaded the scan here. Still havent taken one without the Cyl. Air and rear O2's. Any Help would be really appreciated.
Shane