How can I figure out what the MAF Frequency is at any given point? Does the scanner support this so I can data log it?
How can I figure out what the MAF Frequency is at any given point? Does the scanner support this so I can data log it?
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
I'm starting to think it doesn't exist right now. 8)
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
It's one of the selectable PIDs in the Engine category.
The value seems off, on my car; it's being looked at.
The MAF lb/min value is right however.
I understand that I can edit it's values in the editor but can I log it with the scanner?
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
I mean I have selected and logged it in the scanner.
MAF Frequency is one of the Engine PIDs. At least on
my FBody version.
That's weird because I have the '01F-Body Version and I can't find that in the scanner.
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
screamn, check the update we just sent out. It should be in there.
We got this guy Not Sure, ...
I just installed the update and still can't find it.
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
In the Insert PID list.. click next to the Engine + to open up the Engine PID List, the in it you will see Mass Air Flow Frequency.
It's there.
We got this guy Not Sure, ...
Insert PID list, what is that under because I don't see it anywhere. Sorry to be so dense . I got the scanner open right now. Where's it at?
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
Ok, open up the table view...
Then left click on an empty cell..
Now, right click on that empty cell and a little menu should come up..
Click Insert.
Then the insert PID list comes up. Find your PID and double click it.
We got this guy Not Sure, ...
Cool, I feel like a complete retard now :-[. Thanks Keith ;D
-Michael Rudolph-
2003 Redfire Cobra
Eaton Powered to a:
11.301 @ 129 1.68 60' MT DRs
11.85 @ 124 1.90 60' street tires
I read about updates and was wondering how or when I should get them.
raptorman02, we haven't sent out an update since the last (several weeks ago).. future updates we hope to be distributed through the customer login page of our web site which is still in process.
We got this guy Not Sure, ...