Introduce yourselves here..

[CarlosR]

Hello everyone. Name is Carlos and new to HPT. Bought an ?18 5.0 and looking to seek advice knowledge and understanding about tuning. I want to be able to tune my 5.0 on my own.

[Old Guy]

Hi, Charlie here,
I got this tuner to primarily facilitate E-fan installation on my 2003 Silverado SS. Also will use to disable the MDS on my Dodge SRT. I'm an old guy and don't care about fuel savings.

[wdwombles@yahoo.com]

Hi I am David from a small town in Kentucky

[Caddy Eric]

Hello my name is Eric. I have done a little work to my Cadillac CTS 3.6 & I need to update the tune to satisfy these changes. I've just bought MPVI3 & I'm trying to figure it out. With a little help from my friends. Hey that sounds like a song. ��

[MohammadWeis]

hi my friends

my name is Mohammad from Syria

contcat with me , i want to learn

[djv86]

Im derrik. live in northern idaho. have a 2006 vortecmax. long tubes, sloppystg1.5 cam. built 4l70e and side mount whipple setup waiting to be installed. i have a years of experience with efilive and now getting into hptuners and totally a newb with this software.

[mikkojay]

Mike from Kansas checking in.
Old-school motorhead looking to get into EFI.
Current plan is a LQ9 with 823 heads going into a driver-grade 53 Ford F100 pickup.
Now if I could only decide on a cam...

[badraven]

Hello all!
Jeff Harrington from Madison Tennessee. I am new to computer tuning. I'm an old school street racer from many moons ago. I purchased my HP tuner about three weeks ago. Been reading and learning and would just like to say how much I appreciate this forum being here and accessible to us to help our learning curve. Thank you!

I have a 2001 GMC 3500HD bucket truck. 8.1l, 4L80E, 11.5" open diff, work truck.
I purchased to tune for more mileage. Not sure if that's even realistic to shoot for but 7mpg is a hard pill to swallow.

I actually paid Nelson Performance to tune for me.
Not sure that was the best option, but I didn't want to wait 6 months to figure all this out.

I purchased the MPVI3.
Been looking over the stock versus new tune, learning the types of things that go into a tune.

A lot of tunability with this program.
I'm thinking I don't need my AutoEnginuity software any longer.
This HP scan software has more to it.

Thank you all for your input and for sharing your trials and triumphs in tuning.

Jeff

[frank'n truck]

hi just joined to hopefully learn some things. a few years ago I helped someone out getting their slightly warmed over 5.7 vortec running with a very basic tune and small changes. I really do not know much and it looks like I might be helping someone out again and I would like to know more this time around if it dose happen.

[NORIEGABROS]

This is NoriegaBros from San Antonio, after my first HEMI rebuild I felt pretty confident of doing more thus why now am actually starting to tune in. I have no experience in tuning other than reading the main file from ECU but after that its a daunting task to mess with the settings all over the HP tunes website. Im really hoping to learn by the end of the year, this way I can tune everything that comes my way.
Currently working on my WK2 Jeep Grand Cherokee 2012 Overland 5.7 - 392 Cam & Intake and SW Longtubes with hopes of adapting the SC I purchased last year. All help is appreciated. Thank you!

[EVIL ANDY]

Thanks for accepting
I go by Evil Andy.
I am new to the Ls tuning world.
Any assistance, experience, knowledge or example will all be taken in
Thank you

[Old Iron]

Tony here from Benton, tn......ive done a few ls based tunes with nom issue, retuned a coyote with Hp as well......working on my first cam swap in a ls1, now struggling with no throttle response.......choppy cam is tuned and idleing..just no throttle......69' c10, ls1, choppy cam, aftermarket intake, cable drive.....anyonme on here around chattanooga/ cleavland, tn.....need help!!!!!!

[Lyle Bartle]

Hi, I'm Lyle. Been tuning for 10 years or so. Live in Spokane,Washington. Retired mechanic. I do a lot of 5.3 and 6.0 LS conversions. Just as a hoby.

[Red-Candy-Metallic]

Hello Everyone, my name is Mark. I am a total newbie with regards to tuning, but I have discovered the existence of this art/science recently. I don't have any immediate plans to manipulate tunes, but I am very interested in learning about this craft. I have two Mustang GTs, a 2012 with and MT-82 manual transmission and a 2014 with a 6R80 automatic transmission. I was once ASE Master Tech Certified, but that was in the 1980s, long before most of this technology existed. I am retired, so I have some time on my hands and I have taken to Street Nights at the nearest dragstrip.