I found this link with some answers maybe it will help everyone?
http://forums.guru3d.com/showthread.php?t=271554
I found this link with some answers maybe it will help everyone?
http://forums.guru3d.com/showthread.php?t=271554
We've begun the driver signing process. Hopefully it will be completed within the next couple of weeks.
We got this guy Not Sure, ...
Last edited by Kingsize; 07-10-2009 at 02:50 PM.
2007 Corvette: 440ci LS7 600RWHP N/A
2006 GTO: 500rwhp Stock bottom end LS2 with Bolt on's
2000 Formula: 615rwhp N/A, TH400, 9" Rear
--615rwhp Dyno Pull>>> 615rwhp dyno pull N/A
--9.87 Motor Pass>>>http://www.youtube.com/watch?v=CWYRSYr3nys
1999 Arctic White FRC Corvette: 1 of 311... Bolt ons only.
1992 Camaro: LS swap
1967 Ford Galaxie 500
www.fquick.com/Kingsize
You will likely need to uninstall your old drivers & install these new ones.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
2007 Corvette: 440ci LS7 600RWHP N/A
2006 GTO: 500rwhp Stock bottom end LS2 with Bolt on's
2000 Formula: 615rwhp N/A, TH400, 9" Rear
--615rwhp Dyno Pull>>> 615rwhp dyno pull N/A
--9.87 Motor Pass>>>http://www.youtube.com/watch?v=CWYRSYr3nys
1999 Arctic White FRC Corvette: 1 of 311... Bolt ons only.
1992 Camaro: LS swap
1967 Ford Galaxie 500
www.fquick.com/Kingsize
Great news!!!
2003 Z06
Forged 347
PTE Billet 67/65 Turbos
FMIC / Dual 50mm Tial BOV's
ID 1000 Injectors
RSI Stage 4 Fuel System
07 Z06 Cam
Tripple Nozzle Meth
ACT Twin disk clutch
25# Boost
this works well, I use it,
http://www.citadelindustries.net/rea...plus/index.php
Good news about the driver signing!
Thats great news about the driver signing. Its getting old having to reboot and do the f8 thing.
Any updates on the new drivers?
Thanks Keith, you have no idea how much it bugs me to have to restart to use your software everytime
Just remember not to hate us(end users), hate Microsoft!
http://www.pagetable.com/?p=12
Last edited by mattgallan; 07-29-2009 at 07:16 AM.
We've gone through the tedious signing process, please try the drivers here:
http://www.hptuners.com/pub/HPT_MPVI_Drivers.zip
Please post up your results.
We got this guy Not Sure, ...
To those installing these drivers you must go into your device manager with your interface connected right click and uninstall, the mark the box to make sure you delete the old drivers completely so your pc will recognize the new drivers you've just downloaded.
Once you've uninstalled them disconnect the interface then connect it again & run through the normal steps to find the drivers, this time it won't ask you to continue with the unsigned drivers because, well, now they're signed!
They seem to work fine for me thus far, I'll do some more testing tomorrow.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Windows 7 32 bit RC after I uninstalled the drivers, disconnected the interface, then reconnected the interface recognized them as an "other device" so what you need to do in that case is right click on HP Tuners MPVI-update drivers then go through the shpeal, then click on the OTHER HP Tuners MPVI-update drivers and go through that process.
Not difficult but did catch me off guard as vista was a bit easier in that aspect.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Tested out functionality today read/write/scanning no blue screen which is the main concern with driver changes, everything worked flawlessly so I give them a thumbs up.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Thanks! Works Great!!!!!!
Woot! thats what we like to hear
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Keith deserves the credit, he took the initiative to get it done...we just locked him in the cage with the people at microsoft that sign the drivers and didn't let him eat until it was over.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"