Results 1 to 4 of 4

Thread: Getting code P2270!

  1. #1
    Potential Tuner
    Join Date
    Dec 2008
    Posts
    2

    Getting code P2270!

    I have a 2007 Solstice GXP and recently installed a downpipe with no cat. I disabled the P0240 upon installation, I do not have the rear O2 sensor screwed into the exhaust pipe, I used a plug instead. I guess I will have to disable the P2270 too?!?

    Thanks

  2. #2
    Advanced Tuner
    Join Date
    Aug 2007
    Posts
    503
    Quote Originally Posted by Kool_GXP View Post
    I do not have the rear O2 sensor screwed into the exhaust pipe, I used a plug instead
    Put it back in.

  3. #3
    Potential Tuner
    Join Date
    Dec 2006
    Posts
    3
    Either A. Disable it.

    or B. Plug it back in.

    However, to my knowledge, the 2nd o2 is basically a way to tell you if your cat is messed up.

  4. #4
    Senior Tuner
    Join Date
    Feb 2007
    Location
    San Antonio, TX
    Posts
    1,255
    Disable it using your editor software in the DTC's section. No dirty hands or burnt flesh. Problem solved.
    Janky Monkey Tuning

    Call or PM for tuning solutions.

    Cell 210-954-4985

    Wrench turning provided by 2 Tightwads Racing.

    Tune your own? Start here ----> Open Editor ---> Hit F1...READ!

    READ SOME MORE (Thank username 69Lt1bird): http://ls1tuningguide.com/

    Still lost? Consult a Pro!

    www.thetuningschool.com
    www.calibratedsuccess.com
    www.tunedbyfrost.com