I am putting an LC9 (5.3) from a 2007 suburban and a 4L65E from an 06 Yukon into an older Jeep and using an NP208 transfer case. Will the VSS adapter from jagsthatrun work with this ECM and if so which do I need, the 4-pulse? 40 pulse reluctor ring on the trans output shaft? It would at least help to konw what this ECM is looking for.
Last edited by markeheiden; 12-01-2009 at 12:07 AM.
So, No ideas?
Thanks for all the help.
Go here, lot of good info on swaps.
http://jagsthatrun.com
Free HP Tuners Beginners Tuning Guide
LS1 Tuning Guide
Michigan Snowmobiler
1969 Firebird: 11.67@114 [email protected] 1/8 1.70 60 ft. EPS cam 234/246 .602.606 114+3, 6.0 LQ4, L92 heads milled 10.5:1, Ported L76 intake, ported 90mm Holley TB, 100mm MAF, FIC Custom injectors, Hooker LT, PYPES dual exhaust with an X pipe, 4L65e with all of the good parts inside, FTI 4000 RPM Stall, 12 bolt with 3.73 gears. HP Tuner tuned by me
Been there. They have not dealt with an 07 ECM.
Reply With Quote