-
Tuner
idea for VE paste special
Hey guys, I like the idea of the paste special commands. How about letting us select a target instead of 0. That way we can paste adjustments that would get us to a target number such as '-4'.
- 2002 - M6 - Hurst/LSS - No TCS
- 232/234 .595/.598 112 +2 - 7.4 PRs - Melling Lifters
- Stage 1 DIY Heads - Milled .040 - 10.9:1 CR - PP Golds
- Jethot LTs - DIY True Duals - Magnaflow 2.5 - SLP CME - Dual Cutouts
- Motive 4.10s, Moser Axles, SLP cover, Built 10 bolt
- TSP lid - FTRA - Ported TB - Ported MAF
- HPTuners - LC1 - Matched SVO 30s
- TTIIs - 275/315 - SFCs
-
Advanced Tuner
Re: idea for VE paste special
That is a good idea. Of course you could always work the table to zero and then once it's all lined up just do a blanket subtract of 4....But it really is a good idea, and would probably not be that hard to implement.
-
Tuner
Re: idea for VE paste special
The only problem with doing a blanket subtract at the end is: what about all the cells that you didnt hit while driving. I barely hit more than half of them during a half hour log.
- 2002 - M6 - Hurst/LSS - No TCS
- 232/234 .595/.598 112 +2 - 7.4 PRs - Melling Lifters
- Stage 1 DIY Heads - Milled .040 - 10.9:1 CR - PP Golds
- Jethot LTs - DIY True Duals - Magnaflow 2.5 - SLP CME - Dual Cutouts
- Motive 4.10s, Moser Axles, SLP cover, Built 10 bolt
- TSP lid - FTRA - Ported TB - Ported MAF
- HPTuners - LC1 - Matched SVO 30s
- TTIIs - 275/315 - SFCs