I recently receive a 2010 Camaro to tune in my shop, the mods are: Magnacharger system with 10 psi pulley, CNC ported heads, Custom grind cam, 85# injectors, Kooks 1 7/8 long tube headers and magnaflow exhaust system without cats.
When i receive the car it don´t start, at this moment the car start with a rough idle but when i try to test the car in the dyno at tip-in throttle it lean a lot and at cruise speed is very unstable with a lot hesitation from lean to rich.
Please help me
did u dial in the fuel injectors? and why 85#??? that looks like over kill for the 10psi maggie...
post up ur file
Bader Norris
MEP Tuned
Telephone: +965-55446651
Email: [email protected]
All the mods was made for another shop and i don´t know why they installed the 85s injectors, i only receive the car to tune.
I got problems to upload the tune, can i send it to an email address?
I would ditch the 85's and use a set of 60's unless u want to chase your ass controlling fueling. Put the car in MAF only mode and dial in the MAF. Should have the car dialed in quick
Full Service GM Late Model Performance Facility
www.redline-motorsports.net
Follow US on FACEBOOK!
Follow us on Instagram! redline_motorsports
Reply With Quote
