I bought an 04 GTO a few months ago, and now I'm buying a S/C for my 00 TA and it comes with an LM1 module. So, can I get an upgrade for my existing pkg that will do 2 bar, & wideband, & my GTO? Or do I need to sell this & start over? :
I bought an 04 GTO a few months ago, and now I'm buying a S/C for my 00 TA and it comes with an LM1 module. So, can I get an upgrade for my existing pkg that will do 2 bar, & wideband, & my GTO? Or do I need to sell this & start over? :
2000 TRANS AM WS6 A4
6.6L w/D-1SC
618 rwhp, 761 rwtq
10.42 @ 131.4, 1.46 60'
Bonneville 100 GT2 Class Winner
3rd Place Seattle Roadster Show Pro Touring Class
http://community.webshots.com/user/wahusker
You simply need to purchase the EIO and 2 BAR support, no need to "start over". You will have to send in your module to be exchanged for an EIO module though.
Thanks. So if I just went in on a new unit with a friend that has 1.7 & E I/O, then all we need to do is buy the 2 bar upgrade for his HP T? It will support both his LC1 + my LM1? (the menu indicates it will) And that's good to 14psi of boost, correct?
Oh, and is this MAF-less only tuning? So I'll need to do SD tuning, and then convert back to using my MAF? And I've read where I need to buy a 2 bar MAF sensor too. Where do I get this & what do they cost? I haven't found any mention of them on LS1 tech sponsor sites. (yet)
2000 TRANS AM WS6 A4
6.6L w/D-1SC
618 rwhp, 761 rwtq
10.42 @ 131.4, 1.46 60'
Bonneville 100 GT2 Class Winner
3rd Place Seattle Roadster Show Pro Touring Class
http://community.webshots.com/user/wahusker