I can scan fine, but when I try to open editor all I get is the HPtuner logo. What am I doing wrong?
I can scan fine, but when I try to open editor all I get is the HPtuner logo. What am I doing wrong?
1999 LPM Z28 A4&&K&N FIPK,LS6 cam,Pacesetter LT\"s w/ 3\" X pipe,dual dynomax bullets,Vig 3200,Transgo shift kit,B&M supercooler,LCA,APB,STB,3.73 gears,125 wet N2O.&&Waiting to install MTI SII cam.
You should have a toolbar up the top that says >> file>Edit>favorites etc.
Click on File and open a saved bin file.
You have gone into the "VCM Flash" program and saved your stock .bin file first?
Brian
I did not know that I had to do that. I'm a bit of a virgin at this tunning thing. Thanks.
1999 LPM Z28 A4&&K&N FIPK,LS6 cam,Pacesetter LT\"s w/ 3\" X pipe,dual dynomax bullets,Vig 3200,Transgo shift kit,B&M supercooler,LCA,APB,STB,3.73 gears,125 wet N2O.&&Waiting to install MTI SII cam.
;D
I think i can hear the help files calling you?
there is a TON of good info in there.. check them out..
-Bill
2000 Camaro V6 Boltons and a tune