Here are my stock values. Operating System 16245315
Engine PPM 49095
Trans Scalar 40.9004
PCM is programmed for 3.42s. Now I have 4.10s. Tire heigh is the same.
I have 3 boxes. All blank. I fill the first one with 25, second with 25. Do the values even matter since I want to keep them the same? And last box for gears with 4.1.
original
Engine PPM 49095
Trans Scalar 40.9004
I click save changes and it tells me
"Maximum engine PPM reached
Tire size adjusted."
The new tire box now says 8.14. Is that normal?
And new values are.
Engine PPM 65535
Trans Scalar 63.9990
So is this ok? Do I need to do anything more?
What's the scare transmission tables box for? I click it and the multiplier it shows is 1 so when I commit it doesn't do anything. Should I be manually changing this multiplier to something else? I see that it maxes out at 1.5. Values change as I'm putting in the numbder, but when I press commit it doesn't do anything. When I close the box and go back to it, the previous values are there again. Old and new are the same.
--------------------------------------------------------------
I did it again with what I think is the stock tire ratios.
Old and new tire is 26.177
new gears 4.1
It adjusted the new tire again, but this time to 8.52.
For the scale trans multiplier do I just use 3.42/4.10?
Thanks and keep up the good work.