Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: Dodge Cars/Trucks What can we tune?

  1. #1

    Dodge Cars/Trucks What can we tune?

    I see Dodge is now available to download credits. What dodges can we tune and which year? Thx !

    Clint

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,282
    Its just for preparation purposes. Once we've publicly released dodge software we will make a public announcement here.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner
    Join Date
    Sep 2010
    Location
    Alpena, MI
    Posts
    186
    *Refresh* *Refresh* *Refresh* *Refresh* *Refresh*

  4. #4
    Advanced Tuner
    Join Date
    Dec 2011
    Location
    Clovis, CA
    Posts
    374
    I've got two people wants dodge charger v6 3.5 tunes and a 96 dodge ram 5.9 with a blower needing a tune. Any word on a release or a round about? 6 mon? a year?

  5. #5
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,282
    What year chargers? We don't have a short term eta on 96's as I'm not even sure if we'll be going back that far at this point.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  6. #6
    Tuner in Training BluBeaSSt's Avatar
    Join Date
    Dec 2011
    Posts
    48
    What about the newer HEMI trucks? Any ETA on that?
    2002 Camaro SS
    2013 Jeep JK 2 Door

  7. #7
    Advanced Tuner
    Join Date
    Dec 2011
    Location
    Clovis, CA
    Posts
    374
    2006 chargers 3.5 v6 autos... Seems like when we added a CAI to the car, the top rpm band seems to really lag. It seems to run better without any mods.

  8. #8
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,282
    You might be able to at least read them out with the newest beta software(the 06 Chargers that is).
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  9. #9
    Potential Tuner
    Join Date
    Feb 2012
    Posts
    5
    I'm buying the HP equipment for my wifes SAAB 9-7X with a fresh built 6.0L LS2. I drive a Dodge Magnum with a HEMI 5.7 and some nice adds. My question is, when can we expect to see that so that I can use the HP equipment to tune both cars...

    It'll be cool!

  10. #10
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,282
    What year magnum?
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  11. #11
    Potential Tuner
    Join Date
    May 2011
    Posts
    2
    Jeep Commanders? 3.7L, 4.7L, 5.7L Hemi all will be covered?

    Thanks!

    (PS I can still send a 4.7L read in if you could use it)

  12. #12
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,282
    I don't think we have entered any Jeep vin info to our source code yet so you likely won't be able to read any of them.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  13. #13
    Advanced Tuner
    Join Date
    Dec 2011
    Location
    Clovis, CA
    Posts
    374
    I plugged the scanner into the 06 charger 3.5, it did reconize it as a charger 06 and gave very little readout info in a stock config, however it would not read the pcm via editor. Gave me a error of some sort saying connection cannot be established or something. I figured nope wont work and shut it down but if you want to know more i can do more. Im using beta. I try to keep as current as possible. i was using 2.23.490 which now i believe is older then whats out.

  14. #14
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,282
    yeah email support
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  15. #15
    Quote Originally Posted by Asylumwarp View Post
    I've got two people wants dodge charger v6 3.5 tunes and a 96 dodge ram 5.9 with a blower needing a tune. Any word on a release or a round about? 6 mon? a year?
    I can't help with the Ram, but if you're down for a CMR tune on the challengers, we can do it. Email me at [email protected] if interested. HPTuners is awesome but I dont anticipate this being out anytime soon, unfortunately.

  16. #16
    Advanced Tuner |V3nom|'s Avatar
    Join Date
    Apr 2009
    Location
    Denham Springs, LA
    Posts
    418
    nobody likes the 04 jeep liberty 3.7L lol only a couple of companies do it and theres not enough people out there trying them to find out any real world info. if only hpt supported it then wed be set...
    2008 Sky RL

  17. #17
    TTT.

    Any new updates for this ?

  18. #18
    Advanced Tuner
    Join Date
    Nov 2007
    Location
    MI
    Posts
    686
    is it sad that I want to tune my 07 T&C? Seriously though guys, this is probably a lost cause
    2018 Camaro SS, Maggie 2650, 103 TB, Big Gulp, E85

  19. #19
    I tried to pull the tune off my 2012 hemi 5.7 charger the other day, and it didnt work.

  20. #20
    Tuner in Training
    Join Date
    Mar 2011
    Posts
    46
    hey Bill, any update?