I have a quick EIO question, mainly to clear up terminology that I'm not familar with. I plan on getting the EIO add-on because I plan on getting a wideband O2 in the future and don't want to have to worry about sending my cable back. I see the 8 pin connector in the help file and then options for 1, 2, or 3 pigtails on the site. I'm assuming that with the EIO there will be that 8 pin connector coming out of the main cable correct? Is there a female part that comes with it that has short wires coming out so you can splice in the inputs, outputs, and ground? Are the pigtails the separate connectors and wires you would need to plug into the output pins on the WBO2 controller (red connector in the help file)? Thanks.