Results 1 to 16 of 16

Thread: Needed- 12 series 150 female Metripak connectors

  1. 12-26-2005 #1
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387

    Needed- 12 series 150 female Metripak connectors

    doing a custom wiring thing..need about a dozen of the metripak connectors..
    its the pin for the o2's...I need the ones for in teh o2 sensor connector not teh connector on the car

    thanks if anybody has it
    -Scott -
    Reply With Quote Reply With Quote
  2. 01-02-2006 #2
    txoutlaw
    txoutlaw is offline
    Tuner in Training txoutlaw's Avatar
    Join Date
    Nov 2005
    Location
    TX
    Posts
    27
    i dont have them but i might be able to get them for you. my supplier has a minimum order, so ill try and check it for you tommorow! i also need to know if you need the square one or the rectangle one!
    "A wise man once said that it is better to remain silent and appear ignorant, rather than speak and remove doubt".
    Reply With Quote Reply With Quote
  3. 01-02-2006 #3
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387
    I need the ones that are in th econnector on our o2 sensors....
    not the car side...the actual O2 sensor connector..

    I an going to make a custom wideband/narrowband conection to my car with the stock connectors
    -Scott -
    Reply With Quote Reply With Quote
  4. 01-02-2006 #4
    txoutlaw
    txoutlaw is offline
    Tuner in Training txoutlaw's Avatar
    Join Date
    Nov 2005
    Location
    TX
    Posts
    27
    OK, I'll try and check on these for you tommorow, but be patient because the supplier I have found is slow in rturning calls!

    Also, do you do any bench tuning? If so what power supply do you have, or what would carry the amp draw of the ECM? Do you know how many amps it draws?
    "A wise man once said that it is better to remain silent and appear ignorant, rather than speak and remove doubt".
    Reply With Quote Reply With Quote
  5. 01-03-2006 #5
    MrDude_1
    MrDude_1 is offline
    Tuner in Training
    Join Date
    Jan 2005
    Location
    Posts
    46
    lol, i know what you're making...
    1991 Camaro Convertible with 02 LS1
    Reply With Quote Reply With Quote
  6. 01-04-2006 #6
    1998Ws6
    1998Ws6 is offline
    Tuner
    Join Date
    Dec 2005
    Posts
    108
    e-mail me with your address, and I'll send you some.

    [email protected]

    Ryan
    Reply With Quote Reply With Quote
  7. 01-06-2006 #7
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387
    you get my e-mail Ryan??
    -Scott -
    Reply With Quote Reply With Quote
  8. 01-06-2006 #8
    EC_Tune
    EC_Tune is offline
    Супер Модератор EC_Tune's Avatar
    Join Date
    Apr 2003
    Location
    Almost 2000 feet.
    Posts
    7,876
    Question: Why not just lop off the o2 sensor & attach the length you need? Or: Are you making adapters & need quantity? Check out: Power & Signal

    EC
    Always Support Our Troops!
    Reply With Quote Reply With Quote
  9. 01-06-2006 #9
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387
    I want to make it completely weaherproof....with no splices for better conections...
    I have the conectors.I just need the pins..
    power and signal wanted like $36 for a 100 pack..If I remember correctly...
    and I need 12 pins..LOL...
    not paying $3 a pin for what I need..LOL
    -Scott -
    Reply With Quote Reply With Quote
  10. 01-06-2006 #10
    lik2mod
    lik2mod is offline
    Tuner in Training
    Join Date
    Oct 2005
    Location
    TwinCities, MN
    Posts
    37
    Have you checked through http://www.samtec.com/ they have almost any pin or socket combination that you can think of. If you make the sample request look like a comercial(sp?) order they send out free samples fairly quick. Keep the qty. at 10 or less for best results.
    I use this supplier at work for prototypes often and they just keep sending the requested trials.
    Reply With Quote Reply With Quote
  11. 01-06-2006 #11
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387
    I cant find any on there...
    but lots fo RF stuff...thats a good linke for a whole other project I have going on..LOL
    -Scott -
    Reply With Quote Reply With Quote
  12. 01-20-2006 #12
    txoutlaw
    txoutlaw is offline
    Tuner in Training txoutlaw's Avatar
    Join Date
    Nov 2005
    Location
    TX
    Posts
    27
    man i'm sorry i forgot about you needing these! do you have the crimp tools needed to put them together if i can get you the parts you need to make/build them?
    "A wise man once said that it is better to remain silent and appear ignorant, rather than speak and remove doubt".
    Reply With Quote Reply With Quote
  13. 01-20-2006 #13
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387
    I just need the pins....If you have connectors..I could use them..but I dont need them as I can bastardize a old sensor...

    I can crimp..no big deal...
    -Scott -
    Reply With Quote Reply With Quote
  14. 01-22-2006 #14
    WopOnTour
    WopOnTour is offline
    Tuner
    Join Date
    Aug 2005
    Posts
    68
    To purchase such a small quantity I would just go to any GM Dealer
    Metripac 150 series Male (Sealed)
    Terminal PN# 15326269 located in Tray 19 of the GM terminal repair workstation (J38125)

    HTH
    WopOnTour
    PS> The female 150 M/P sealed is Terminal PN#: 12191819 / Tray 8
    Reply With Quote Reply With Quote
  15. 01-22-2006 #15
    S2H
    S2H is offline
    Senior Tuner S2H's Avatar
    Join Date
    Apr 2005
    Location
    Schexnayder Racing - Arnaudville LA
    Posts
    4,387
    is there a catalog where I can look at the spread apart view like GM has when you go in for parts?? ...theres a few other things I need and would like to find the part #'s so I dont have to deal with the idiots around here....LOL
    -Scott -
    Reply With Quote Reply With Quote
  16. 01-23-2006 #16
    txoutlaw
    txoutlaw is offline
    Tuner in Training txoutlaw's Avatar
    Join Date
    Nov 2005
    Location
    TX
    Posts
    27
    pm sent
    "A wise man once said that it is better to remain silent and appear ignorant, rather than speak and remove doubt".
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »