I have seen the topics before, but cant find it. I hooked up my LM-1, Sheild to black, white to white, programmed the LM-1 for output 0=10 5=20. I went to the Scanner added the LM-1 to EIO Pid Input one, and when I log, the LM-1 = 14.xx & HPT reports 11.xx? I have tried my wits end. What next.
Thanks
Charlie
00 NBM Z28 Rossler A3 ATI 4k TC, 347 w/ ETP 225's, EDC 231/242 .637/.622 @ 114*, LS6 Intake, Kooks 1 7/8" LTs, Wolfe 6pt, BADZ LCA, Spohn SFC & TA, Custom 2 Stage N2O. Next up, 90/90, 9" and Bogarts.
does the HPT value stay constant or does it fluctuate? I thought the white wire was the secondary output of the LM1 (but may be mistaken) ... you can test it really easily by monitoring the output voltage of the LM-1 ... if the LM-1 is reporting around 2.5 volts then seems it's ok, I would check your LM1 PID (create a custom one)
worst case you can try setting up both outputs to 10-20 0-5 and try again ... it's very doubtful it's a problem w/the HPT cable or software... likely a problem w/the value the LM-1 is outputting
Mike Horist
00 WS6 (TA) | 04 WS6 (GTP Comp G)
Mike \\#at&\\ horist \\&dot$\\com
BOTH cars HP Tuners Tuned
yeah i personally just set both of the ouputs for 10-20 0-5 so it doesnt matter which one i hook in.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It's been nearly a year now since I last used my LM-1
but I recall having to use one particular of the EIO
inputs, the others were mapped to other WB types'
functions and I couldn't deduce how to make the
assignment play clean (just kept trying until the
numbers made sense). Hook the LM-1 up to the PC
direct, LMconfig program will tell you what the LM-1
output curve is; that has to be consistent with the
HPTuners curve. This is what the problem sounds
like to me. I have had the LM-1 revert to a profile
other than what I programmed, and mess me up like
this, I vaguely recall.
Anyway, I bet it's something like one of these.
Reply With Quote