Getting close to plugging HPtuners into a LS2 converted 69 Camaro. Does the orange power wire going to the ODBII port need to have a 200ma fuse to protect the drivers in the HPtunerspro Interface? I noticed that certain wideband wiring configurations require a 200Ma fuse to protect the drivers in the interface. The ODBII batt. orange wire will be coming off an independant fuse block under the dash that is protected by a 30a circuit breaker and draws power straight off of the battery + terminal. I can place any standard blade fuse between it and the ODBII port. What is neccessary?...if anything.