Stock Z06 file on here yet?

[Mep_q8]

Would like to get my hands on a stock file and see what all differences have been made between the LT1 vs the LT4 especially in regards to knock reference.

With 580whp stock @ 10psi, it'll also give us an idea of how much power we will be able to throw at the "stock" internals with more boost.

[Ben Charles]

Hope to see one soon, I know LMR and Vengence both have a factory Calibration, but I have heard nothing from them yet.

[Slow Poke]

C'mon nobody out there wants to post a "stock" file for us?? I'll post mine in few weeks when the auto comes in. Some of us just want to see what the "heat soak" IAT & ECT retard tables look like from factory.

[Higgs Boson]

there's not exactly billions of Z06 out there besides the fact that only a few will be pulling tunes and even fewer who are members here and even fewer who care to post it. patience, one will turn up eventually and I don't think you are the only person who would like to see one.

[507]

Almost got ahold of one for the site, butt them sales man at the dealership won't give me 5 minutes to myself with the car. Fun car too.
Sorr

[INTMD8]

Here you go-

[Higgs Boson]

that was fast. ;-)

[Slow Poke]

Thank You. INTMD8

[Kakashi]

I made this account just to thank you INTMD8!! God bless you

[Slow Poke]

INTMD8,

What HPT version did you use to the download file? I get a failed check sum in V 2.25(1137) beta and unable to read in V2.24(977). Thanks for your reply

[caesar]

INTMD8,

What HPT version did you use to the download file? I get a failed check sum in V 2.25(1137) beta and unable to read in V2.24(977). Thanks for your reply

You need the latest 2.25.

[Slow Poke]

Thanks Caesar. Are you using a beta 2.25 version? If so, is your cal version higher than 1137. Thx

[caesar]

Yea, latest version is 1421.

[Slow Poke]

Thx. I will email support for latest cal version. Take care.

[Ben Charles]

Just got home from vacation, about to check out the file.

Thanks for posting.

[SultanHassanMasTuning]

awesome!

[zr1driver]

what you guys think about the strategy? i heard there is much to do with heat soak tables.

[Ben Charles]

The Timing Tables are not the problem IMO

[8850]

The Timing Tables are not the problem IMO

If the C7Z is anything like the CTS-V the IAT2 gets up to 180* easily idling. Look what that does to advance. Too small heat exchanger and fans come on too late. My fans don't come on until 229* with stock setting.

[zr1driver]

@ Ben, what you think is a problem for the power loss after some pulls? I read something about a big power loss on internet.