Results 1 to 5 of 5

Thread: Base Tune for LS7 440CI with the 12200411 ECM

  1. #1
    Tuner in Training J Alper's Avatar
    Join Date
    Jan 2014
    Location
    Las Vegas
    Posts
    39

    Base Tune for LS7 440CI with the 12200411 ECM

    Does anyone have a good base tune to start me off with the LS7 I am building

    I will list the motor, If I need to add more info let me know, any help is appreciated,

    440 cubic inch
    LS7 block 10.8 to 1
    bore is 4.135
    Heads are 66cc
    Lunati 4.1 crank
    cam is .584.584 - @.050 Duration 227/223 add-277/283 lobe cnt-113/109
    with a 1.8 ratio rocker lift is .618/618
    FAST 65.5 lbs short ev6 injectors
    factory intake
    102MM throttle body

    Stand Alone Harness in a Sand Car
    No Vss, manual trans

    sensors are
    Front Cam sensor
    24X system with the 411 ECM
    ls3 credit card style maff
    LS1 single wire knock sensors
    LS1 Map Sensor 1999-2001
    LS1 1999 O2 Sensors only using the up stream

    Thanks

  2. #2
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    those injectors will give you the worse idle.
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  3. #3
    Tuner in Training J Alper's Avatar
    Join Date
    Jan 2014
    Location
    Las Vegas
    Posts
    39
    I am up for any suggestions, it is a sand car, so it does not need great manners, but would like the best injector for
    WOT,

    the car is driven like a road race car, on and off the throttle,


    bump for a base Tune, anyone?

  4. #4
    Senior Tuner SultanHassanMasTuning's Avatar
    Join Date
    Nov 2009
    Location
    All Around
    Posts
    3,149
    post the current file
    Follow @MASTUNING visit www.mastuned.com
    Remote Tuning [email protected]
    Contact/Whatsapp +966555366161

  5. #5
    0411 can do speed density native, no custom OS needed. you're not going to find a good maf cal in 0411 format for the cartridge maf so just ditch it and do SD from the start. search how to put 0411 into SD mode and then just work in the ve table.

    also, any further posts belong in the gen 3 forum since the 0411 is gen 3.