AEM 30-0300 Wideband with direct CAN integration W/ VCMScanner. Need beta testers.

[schpenxel]

Good to hear!

[TSloper]

Here is a pic of my setup.

IMG_0280.jpg

[schpenxel]

Nice!

[dr.mike]

OK everyone. This is last call for AEM 30-0300 and 30-0310 beta re-flashes.

I will stop doing the re-flashes after next week.
So far, everything looks to have gone great with them.

[MeentSS02]

Is this something you think AEM will take on themselves for their product line? This is an incredible capability, and I'd hate to see it end here.

[dr.mike]

I'm pretty sure somebody will take it from here.

[MeentSS02]

Here is a pic of my setup.

I went with a slightly less elegant solution of a y-splitter and a right angle extension since the OBD2 connector in my car puts the cable directly in line with the clutch...still tidying up the vehicle side of things, but overall I'm pretty pleased with how it turned out.

[schpenxel]

OK everyone. This is last call for AEM 30-0300 and 30-0310 beta re-flashes.

I will stop doing the re-flashes after next week.
So far, everything looks to have gone great with them.

I'm still going to send you mine, just haven't had time. Hopefully I don't miss the opportunity

[kk5zc]

I'm really, truly shocked. Would you mind getting me a copy of that firmware? I'm one of the guys who has issues with 1.21. (sorry for the thread derail dr. mike!)

My 30-0310 is installed and working in HPTuners. Thanks dr.mike for the firmware update.

Sevinn,
Did you get your Dashlogic to work with AEM Wideband? I updated my Dashlogic config with what I believe was the right setting, but it only reported 0.00.

Thanks,
Bobby

[schpenxel]

I'm interested in whether it worked with dash logic or not too. I got them to add 4 different PID's, they thought at least one would work. Did you try all of them? Did someone send you the firmware update I assume?

[sevinn]

My 30-0310 is installed and working in HPTuners. Thanks dr.mike for the firmware update.

Sevinn,
Did you get your Dashlogic to work with AEM Wideband? I updated my Dashlogic config with what I believe was the right setting, but it only reported 0.00.

Thanks,
Bobby

Never saw this reply sorry. I didn't get the AEM wideband yet. schpenxel sent me the test firmware that he ended up having a problem with so I ended up losing hope that they would get it right and put off ordering the wideband and now it's too late

[schpenxel]

They got the other issue fixed now

[sevinn]

They got the other issue fixed now

Yeah I'm thankful for that. Still never ordered the wideband though, don't really feel like running the wire into the car anyway lol

[braden13]

I sent you a PM Dr. Mike

[kk5zc]

I'm interested in whether it worked with dash logic or not too. I got them to add 4 different PID's, they thought at least one would work. Did you try all of them? Did someone send you the firmware update I assume?

I have version 2.02/2.2. The firmware download says 2.02, but the version # on configuration utility and on the DIC says it is 2.2. Nevertheless, I tried the 4 PID's they have loaded, 32, 33 34 & 35. All show a reading of 0.0.
Description of PID's - Actual Lambda Bank PID 24 & 34 - Actual AFR Bank PID 24 & 34

[schpenxel]

I assume it shows up in HPT correctly over CAN bus?

[kk5zc]

Yes

Capture.PNG

[braden13]

Your PM Inbox says you've reached your quota, mine is on its way to you Mike. I appreciate it.

[dr.mike]

Ok. I cleaned u some messages. PM should work now.

kk5zc, it looks like you have the poling rate set slow for the WB ?

[dr.mike]

Thanks to everyone who helped out with the beta testing on the AEM OBDII firmware upgrade.
I am wrapping things up, now.
Everything looks good to go. Hopefully, someone will pick the product up soon.