he used to have a 4400...sent it back..got it built as a 4000...
locked perfect before...now it wont lock at all...
commanded lock in VCM controls...and it locks...but as soon as we give it a little gas it unlocks...
log attatched with status bits and a bunch of tranny stuff...
comanded lock in VCM controls at about 950 frames into it....
I have other logs if you want to see....
also..dont mind the wideband info(its not right on this log)..it overheated on me..I need to add a heatsink to it tomorrow when we go to finish the tune up...
and we want to be able to lock teh converter in 3rd in upper rpms at the track tomorrow..but I dont know if thats gonna happen right now cause we cant get it to lock at anything more than 15% TPS..
thanks for any advice....
we are trying to determine if its the converter(possibly screwed up by YANK) or maybe if the TCC solenoid is bad...or if its an issue in the tune...
IF you want the tune..I can post it...but its a beta that only mods have access to right now..so theres no point cause nobody will be able to read it anyways...but I can do screen shots of the tables or put up a different tune with teh same values in the tables..LOL