Page 3 of 4 FirstFirst 1234 LastLast
Results 41 to 60 of 69

Thread: VCM Suite 3.2 - New Dodge Vehicle Controls & Special Functions

  1. #41
    Tuner Pector55's Avatar
    Join Date
    Nov 2015
    Location
    Dover, PA
    Posts
    186
    I would like to be able to turn my cooling fans on in the staging lanes and between runs, while keeping the engine off. I was going to wire up a switch to override things and be able to do this but a Diablo Trinity owner stated the Trinity allows this. Is this a feature that could be added to our special functions? The ones added recently were fantastic so I thought I would ask about a fan override as well.
    2013 Dodge Challenger RT Plus - Shaker

  2. #42
    Advanced Tuner 2therock's Avatar
    Join Date
    Jun 2009
    Location
    N. GA
    Posts
    363
    I would like this also as my GM truck tune has this.

    [ECM] 8061 - Ignition Off Fan Run Time: Run time for fans if Ignition Off Fan Disable Temp is exceeded at ignition off.
    Radix'd 05 L33 5.3 ECSB Z71 @ 387-HP 395-TQ
    2013 Dodge Charger R/T Plus 362.6-HP 389.58 TQ

  3. #43
    Advanced Tuner 2therock's Avatar
    Join Date
    Jun 2009
    Location
    N. GA
    Posts
    363
    I would also like to browse the section without having to be connected to a vehicle to give it a study.
    Radix'd 05 L33 5.3 ECSB Z71 @ 387-HP 395-TQ
    2013 Dodge Charger R/T Plus 362.6-HP 389.58 TQ

  4. #44
    HPT Employee Mark@HPTuners's Avatar
    Join Date
    Jun 2014
    Location
    36.1094, 115.1781
    Posts
    431
    Quote Originally Posted by Pector55 View Post
    I would like to be able to turn my cooling fans on in the staging lanes and between runs, while keeping the engine off. I was going to wire up a switch to override things and be able to do this but a Diablo Trinity owner stated the Trinity allows this. Is this a feature that could be added to our special functions? The ones added recently were fantastic so I thought I would ask about a fan override as well.
    We will look into it. Thanks!

  5. #45
    HPT Employee Mark@HPTuners's Avatar
    Join Date
    Jun 2014
    Location
    36.1094, 115.1781
    Posts
    431
    Quote Originally Posted by 2therock View Post
    I would like this also as my GM truck tune has this.

    [ECM] 8061 - Ignition Off Fan Run Time: Run time for fans if Ignition Off Fan Disable Temp is exceeded at ignition off.
    Please email support with parameter requests. Although, it's quite possible your Dodge vehicle may not have this parameter as GM and Dodge are quite different.

  6. #46
    Tuner in Training Srtboost4u's Avatar
    Join Date
    Aug 2012
    Posts
    34
    Neon Srt4 scanner support.... please please please with a cherry on top.

  7. #47
    Tuner Scottyb_288's Avatar
    Join Date
    Nov 2015
    Location
    St. Louis MO
    Posts
    184
    Dear god yes. ^^^^^^^

  8. #48
    Advanced Tuner
    Join Date
    Nov 2007
    Location
    MI
    Posts
    652
    on all the 15's I've tuned I'm getting codes that will not clear. Even with the "special" dodge reset. Noticing U0100 popping up too just reading the file out. Have to delete it out of the tune to get rid of the engine light.
    2018 camaro ss stock

  9. #49
    Tuner in Training
    Join Date
    Aug 2011
    Location
    Quebec
    Posts
    33
    Hello,

    The window of controls and special fonctions is blank :-(

    what's wrong ?

    Grand Cherokee 2012 ECM NGC4A
    Last edited by Jimmy; 09-17-2016 at 10:02 PM.

  10. #50
    HPT Employee Mark@HPTuners's Avatar
    Join Date
    Jun 2014
    Location
    36.1094, 115.1781
    Posts
    431
    Quote Originally Posted by Jimmy View Post
    Hello,

    The window of controls and special fonctions is blank :-(

    what's wrong ?

    Grand Cherokee 2012 ECM NGC4A
    Email Support.

    Make sure to include a VCM Suite Infolog while connected to the vehicle.

  11. #51
    Tuner in Training
    Join Date
    Aug 2011
    Location
    Quebec
    Posts
    33
    Quote Originally Posted by Mark@HPTuners View Post
    Email Support.

    Make sure to include a VCM Suite Infolog while connected to the vehicle.
    What do you mean by "infolog" ?


    Thanks

  12. #52
    Tuner in Training
    Join Date
    Aug 2011
    Location
    Quebec
    Posts
    33
    Email support Is : Support@hptuners.com ?

  13. #53
    HPT Employee Mark@HPTuners's Avatar
    Join Date
    Jun 2014
    Location
    36.1094, 115.1781
    Posts
    431
    Quote Originally Posted by Jimmy View Post
    What do you mean by "infolog" ?

    Thanks
    Information on what an InfoLog is and how it can be obtained can be found here: http://www.hptuners.com/forum/showth...acting-support

    Quote Originally Posted by Jimmy View Post
    Email support Is : Support@hptuners.com ?
    You are correct.

  14. #54
    Potential Tuner
    Join Date
    Sep 2016
    Posts
    7
    Hello,

    Any time frame on Trans tuning for 05 PCMS?

    Thanks
    Jared

  15. #55
    Potential Tuner
    Join Date
    Oct 2017
    Posts
    8
    tuning on 14' Viper replaced the Throttle bodies and need to do relearn. I click the special functions tab and it is blank. It works on the GM models just fine. Am I doing something wrong?

  16. #56
    Potential Tuner
    Join Date
    Oct 2017
    Location
    baghdad
    Posts
    2

    Lightbulb

    Quote Originally Posted by Mark@HPTuners View Post
    VCM Suite 3.2 brings all new special functions to Chrysler support. Located within "Controls and Special Functions" in VCM Scanner 3.2, you will notice even more controls & special functions than before



    New functions include1:

    • Throttle Relearn: Will perform a throttle relearn for vehicles equipped with ETC.
    • Reset All Adaptives:Resets all adaptives (fuel trims, etc.)
    • Clear DTC: Chrysler Specific DTC Clear. Recommended to use along with the standard "Clear DTC" in "Diagnostics and Info"
    • Gear/Tire Adjustment: Was in 3.0 as well. Change your tire size and/or adjust gear ratios using this special function.
    • Traction Control Disable: Will disable Traction Control. Depending on the vehicle, you may need to do this after every key cycle. (Off-road use only)
    • Traction Control Enable: Re-enables traction control after you have disabled it, if it doesn't re-enable on it's own.


    1(Available functions may vary depending on what your vehicle supports)(Currently only for 2007+)


  17. #57
    Potential Tuner
    Join Date
    Oct 2017
    Posts
    8
    Yes I saw that post but when I attempt to do that on the 14' viper i get non of those options its just blank.

  18. #58
    Señor Tuner MeentSS02's Avatar
    Join Date
    Jun 2005
    Location
    Dayton, OH
    Posts
    1,117
    Quote Originally Posted by Ttmerc View Post
    Yes I saw that post but when I attempt to do that on the 14' viper i get non of those options its just blank.
    Have you already written the base file, or are you trying to do the relearn on a non-modified Viper PCM?
    2008 Viper - now with HPToona
    Now about that burrito warmer...

  19. #59
    Potential Tuner
    Join Date
    Oct 2017
    Posts
    8
    Yes the car has been tuned with the cable I am using. Its a modified viper. Has had more than 1 hp tuners tuner write a file on it if that matters.

  20. #60
    Señor Tuner MeentSS02's Avatar
    Join Date
    Jun 2005
    Location
    Dayton, OH
    Posts
    1,117
    I know the feature has been available in the past, at least for Gen 4s. Have you emailed support?
    2008 Viper - now with HPToona
    Now about that burrito warmer...